replacing light bulbs

[stealthy]

i am replacing my turn signal bulbs, do they just pull out or what? they seem to be tough just to pull out. i have a 92 sedan. i'm also replacing my headlights, what the easiest way of getting to them?? do i take out the whole housing or what? thanks for your help:)

[civicvtec1ps]

Do you have car manual?

[96greencivic]

Manual is your friend

[Rick James]

im thinking u gotta pull the bumper off
i know 6th gens ya do

[DirtyD]

no, you do't need to take off the bumper, you just pop out the corner lamp and jam it in therr

[96greencivic]

Originally posted by eminemslm0
im thinking u gotta pull the bumper off
i know 6th gens ya do

You don't need to take out the entire headlamp unit. All you need to do is go through the wheel well and pop out the turn signal bulbs. Hella lot ezier then taking out the unit. Even says so in the manual. Just turn the wheel to make it ezier.

[stealthy]

well here's my problem, i can't get the actual turn signal bulb out, i can get to it and all, it jjust wont come out. and on the headlights, i dont know how to get to the actuall bulb.

[Crystal]

if it's ont he headlights... the 6th gens are easy... for the right turn signal turn the wheels to the left and go to the wheel well in front of the tire. lift that and you can probably see the housing for the lights. you have to turn the light bulb a little counterclockwise in order to get it out. that's how they hold it in by a screwing mechanism. I did this a couple of months ago so i hope i got most of the details right. if not, i'm sure you can figure it out.

the trick is turning the bulb a little before actually tugging on it.

[Justyntyme]

yep how Crystal said it don't just pull or you will freik it up.

[civic31g]

on the 5gens. u can just pull out the turn signal part. thier is a screw at the too under the hood. unscrew that, then take ur finger and pop out the turn signal houseing. that simple

[stealthy]

ok thanks, now what about changing the headlight bulbs??

[civic31g]

the head lights are tough to get out if u have big hands. what you do it remive the wire thinggy from the back of the headlamp and remove the rubber boot around it, then push in the wire that holds the light push in and up. then it should just fall into ur hands. reaccimble is oppiste of removel

[stealthy]

Originally posted by civic31g
the head lights are tough to get out if u have big hands. what you do it remive the wire thinggy from the back of the headlamp and remove the rubber boot around it, then push in the wire that holds the light push in and up. then it should just fall into ur hands. reaccimble is oppiste of removel

thanks man i'll try it soon, its too cold right now lol