4doorcivic16s build up new 4door

[4doorcivic16]

heres my newest pride and joy got here for $1000 runs pretty good a little beat up but nothing bad.
im plan on putting my ls turbo in it. im not going to fu** this one up like my last one
http://img358.imageshack.us/img358/8822/picture003pw9.jpg
http://img358.imageshack.us/img358/1103/picture004et0.jpg
http://img358.imageshack.us/img358/5811/picture005uq8.jpg
http://img358.imageshack.us/img358/9950/picture006zu6.jpg
http://img358.imageshack.us/img358/8951/picture007zi6.jpg
http://img358.imageshack.us/img358/7720/picture008tx2.jpg

[Steven.]

SWEET, i want a 4dr also. lol good luck with it man.

[4doorcivic16]

thanks

[kangaroo]

I love the 4th gen 4drs. They can be bad ass if done right.

[4gcivic69]

so then what are you doin rex

[SilentMist]

Nickk

you know,I defenatly gonn ahave to burn it up when,I come for a vist haha

[Steven.]

so then what are you doin rex

sold it to me.

["V"]

nice :thumbs up

[TiiM iiS l3eAsT]

i hate 4 door 4g's.....but lets see what u can do with this one....

[CivicKid95]

I'd love to build one of these up, but I think it'd be really expensive upgrading basically EVERYTHING. Still, cheap to start with and super pimp if done right.

[89SiGUYrex]

i miss my lx... but ya i wanna c this thing tear ass

[CivicEX13]

nice gotta love 4drs!

[4gcivic69]

what made you sell the rex though man it was so clean

[Melt]

nice car dogg i was wondering what you were driving when i saw you sold the crx to green

[4doorcivic16]

what made you sell the rex though man it was so clean

idk i like them and all but theres just something about 4doors i love. i think its because not many people have em.

[Steven.]

idk i like them and all but theres just something about 4doors i love. i think its because not many people have em.

true, i like the 4g4drs also. if i find one ill have a coupe, hatch and sedan.:lol:

[4doorcivic16]

cleanin and then a little shot.

http://img156.imageshack.us/img156/967/picture012id5.jpg
http://img299.imageshack.us/img299/9952/picture013dn4.jpg
http://img299.imageshack.us/img299/2479/picture014ns2.jpg
http://img299.imageshack.us/img299/8403/picture017xm0.jpg
http://img299.imageshack.us/img299/3333/picture023ug0.jpg
http://img176.imageshack.us/img176/8391/picture019wk1xj9.jpg
http://img176.imageshack.us/img176/3228/picture022yu1qs6.jpg
http://img402.imageshack.us/img402/9238/picture020xq9.jpg
http://img171.imageshack.us/img171/7413/picture021zq6.jpg

[ClemsonCiv]

hmm that was my very first car right there. brings back memories. paid $3000 and sold it for $4000. bone stock haha

nice pick up

[Genuine Rolla]

not bad man....looks like you have a rather clean slate to work off of.

[4gcivic69]

looks damn good cant wait to see it in person at the meet

[4doorcivic16]

thanks maybe ill have the ls in there but idk yet

[4gcivic69]

yea hopefully my a6 is in and i have the si tranny swapped in

[4doorcivic16]

a cuple of pics
zc cluster
http://img356.imageshack.us/img356/7012/picture078qt1.jpg
H.I.D.'s 8k
http://img356.imageshack.us/img356/2061/picture070ua8.jpg
my new side exit exhaust dont ask why we made it come out the drivers side
no cat or muffler 2 1/2 inch pipe
ill get better pics later
http://img356.imageshack.us/img356/6521/picture077ef9.jpg
http://img356.imageshack.us/img356/357/picture075gb7.jpg
also got a new sticker:lol:
http://img356.imageshack.us/img356/1141/picture076gw3.jpg

[Steven.]

nice

[BONESTOCK]

What the? Why did you put side exit exhaust?

[4doorcivic16]

because no one has them around here.

[Steven.]

because no one has them around here.

my accord had exhaust like that, bad ass

[plazmascivic]

those seats look like seats from the 05 mazda RX8

[Steven.]

those seats look like seats from the 05 mazda RX8

they are.

[Jordan_n]

omg I love ur exhaust, I been debating on merging it into the side of the car, whats it sound like?

[Steven.]

omg I love ur exhaust, I been debating on merging it into the side of the car, whats it sound like?
hum, with a stright pipe, its goign to loud as shit

[4doorcivic16]

sounds awsome its really loud but its got a good tone to it.

[4gcivic69]

i demand a vid or sound clip.. naw but it looks good bro

[Jordan_n]

actually I would really like to hear a sound clip or vid, plz

[4doorcivic16]

ill make one tomorrow

[Jordan_n]

still waitin on that sound clip=)

[4doorcivic16]

ill get it today here some engine shoots the bottem end is done.
http://img442.imageshack.us/img442/414/picture057uz1.jpg
http://img67.imageshack.us/img67/1803/picture081zy0.jpg
http://img442.imageshack.us/img442/8323/picture080aa0.jpg

[OVNi_CIVIC]

oo, i like it, steering wheel looks familiar too, :)
+2 on the exhust vid, i wanna hear how loud it is

[Steven.]

ARP FTW, i just got mine Fedex today

[4doorcivic16]

here it is this was taking on a cannno camra
http://videos.streetfire.net/video/8a9c68b6-acc4-4ae6-8bf1-98cf0160f7ca.htm

[Jordan_n]

Yes!!!!!

[plazmascivic]

god that sounds so much cleaner than i expected, i expected akr;awjkfhasd;jklfhasddjifhas;lkjghaskf/. no offense or anything, sounds good man keep it up.

[Steven.]

reminds me of my 88 accords exhaust

[4doorcivic16]

lol Did your have a exhaust on the accord?

[4gcivic69]

whered you get your hid's at

[4doorcivic16]

i got them from Kyle.there just universal e bay ones.

[TiiM iiS l3eAsT]

whered u get that cluster at???? i want that!!!!

[Steven.]

lol Did your have a exhaust on the accord?

when i bough my accord, it had a stright pipe, and 2 outlets, one behin each rear wheel.

[4doorcivic16]

lol every one wanted me to do that but ill stay with one. i got the cluster from green>:lol:

[TiiM iiS l3eAsT]

damn...i love that cluster....i have a zc and it tops out the stock 120 mph.....i want the 150 one.....

[1999stockaccord]

looks great man, ive been looking at a 4th gen 4dr or a wagon next

[4doorcivic16]

thanks yeah i would love to have a wagon but there like impossible to find around here.

[Steven.]

damn...i love that cluster....i have a zc and it tops out the stock 120 mph.....i want the 150 one.....
http://cgi.ebay.com/ebaymotors/Honda-Civic-CRX-16v-zc-UKDM-JDM-speedo-cluster-clocks_W0QQcmdZViewItemQQcategoryZ33673QQhashZitem 320018426169QQihZ011QQitemZ320018426169

but you would have to rewire for the 88-89 cluster

[plazmascivic]

naa all u would have to do is take off whatever u wanted, say the speedometer and put it in the 88,89 one,

[4doorcivic16]

u have to use the usdm gauge case with the edm gauges>

[4doorcivic16]

i got a godie for the 4door today ill have a pic tomorrow here a hint it mostly red>

[Steven.]

u have to use the usdm gauge case with the edm gauges>
unless you have a 88-89 hatch or CRX

[plazmascivic]

u have to use the usdm gauge case with the edm gauges>

Thats what it looks as tho, but master of the universe says that it wont work.

[4doorcivic16]

if you have a 88-91 hatch crx anything you have to swap guages or els the lights wont work i know i went throught it.

[4gcivic69]

wheres the pics at of this so called goodie

[4doorcivic16]

havent had time to take it yet ive been working all day.

[4gcivic69]

havent had time to take it yet ive been working all day.

oh alrighty then

[4doorcivic16]

ill get the pic some day.

[4doorcivic16]

here it is i finaly got a pic traded my steering wheel and a strut bar for it. its brand new it was in my friends car for like a week.

http://img411.imageshack.us/img411/1637/picture006cx9.jpg

http://img411.imageshack.us/img411/3514/picture007ea2.jpg

also doing a mpfi swap at the moment

http://img411.imageshack.us/img411/7307/picture005mp8.jpg

[4doorcivic16]

well i have some updates. ive jsut got a new job at mr tire woohoo s0 ive been working alot. but i got a cople of new things.
my old coil took a shit on me so got a cool msd one and cap =$80
http://img297.imageshack.us/img297/8637/picture005bp5.jpg
also got a aem cold air intake =free
http://img297.imageshack.us/img297/3020/picture006yd3.jpg
gti shift boot and knob=free
http://img296.imageshack.us/img296/3023/picture012qp0.jpg
some polishin i did on the ls head
befor
http://img297.imageshack.us/img297/2769/picture010pb6.jpg
after
http://img297.imageshack.us/img297/9825/picture009yx1.jpg

more to come =)

[4gcivic69]

looks good but figure out that mpfi swap man.. i cant wait to get my car back down so i can do my mpfi swap

[4doorcivic16]

im going to have a shop wire it up when i put my ls in> i hate wiring

[4gcivic69]

oh cool cool.. yea i hear ya im still worried about atempting it on my car hopefully i get my car bsck together soon im just waitn for my bushings to get pressed out then reassebmling all the suspesion.. check my thread its a hella mess right now

[4doorcivic16]

well i lowerd and put a jetta lip on o and got a new exhaust

http://img175.imageshack.us/img175/9509/picture069hk7.jpg
http://img175.imageshack.us/img175/4919/picture062dl8.jpg
http://img108.imageshack.us/img108/166/picture063ja4.jpg
http://img164.imageshack.us/img164/2636/picture067mh5.jpg

turbo
http://img108.imageshack.us/img108/2139/picture061bs6.jpg

[Steven.]

ebay turbo ftw.
same one i got

[4doorcivic16]

yes sir there the best kinda.

[Suanico]

did you get rid of the side exhaust, because it was ugly, i like seeing 4th gen 4 doors getting fixed up they are never shown enough love good job

[Steven.]

when i get my sedan.
shoot for 400+hp vitara turbo setup

[4doorcivic16]

no i took it off cuz it was way to loud.

[4doorcivic16]

im shooting for 300 on a dohc zc or a single cam. i sold the ls.

[RHennin]

that a t3? who do you guys usually buy from on ebay cuz im considering buying one from there. Is it worth it paying a little extra for the turbos that come from the couple of places that have a 90 day warranty etc...

[4gcivic69]

its an xs power t3/t4 without the xs power name on it.. just serch for xs power and youll find it or just serch t3 and its the t3/t4 thats 169.99 plus shipping

edit..
CLICK (http://cgi.ebay.com/ebaymotors/T3-T4-Turbo-T3-T04e-63-AR-57-Trim-N-R_W0QQitemZ250100606345QQcategoryZ33742QQrdZ1QQcmd ZViewItem)

[4doorcivic16]

yeah what he^ said.

[EGlude Attitude]

Going cheap on the actually turbocharger itself is a bad idea IMO. Buy the best and cry once.

[mitcheg6]

nice- i like were this is going....

[oneThree]

old skool is awesome

[4doorcivic16]

o boy its coming just ordered it wooohhooo

http://img124.imageshack.us/img124/7421/zcmain1sk9.jpg

[Genuine Rolla]

nice update bro..! :thumbs up

[Ls-HatchBoy]

im doing the same swap ls turbo, except its going to a hatch, lemme know ihow it goes....

[Steven.]

im doing the same swap ls turbo, except its going to a hatch, lemme know ihow it goes....

thats not a LS

[4doorcivic16]

im doing the same swap ls turbo, except its going to a hatch, lemme know ihow it goes....
yeah bro i sold my ls thats a DOHC ZC. and ill be turboing that>

[Steven.]

Going cheap on the actually turbocharger itself is a bad idea IMO. Buy the best and cry once.

with a simple seal change and a oil restrictor, no name turbos can be good.

ill be sure to laugh at people who make fun of my ebay turbo when the 300hp mark is hit.:lol:

[4gcivic69]

ill be right behind ya buddy.. lol there is gonna be like three of us all runnig ebay builds shittin on expesive name brand kits all day long

[plazmascivic]

i agree i need a decal on my car that says "i built my honda using EBAY" or we need to get just an ebay decal.

[Steven.]

i agree i need a decal on my car that says "i built my honda using EBAY" or we need to get just an ebay decal.

:smileyR: :rice: :pimp:

[SilentMist]

:smileyR: :rice: :pimp:
Greens just mad cause his car sponosered by ebay BWHAHAHA.

Your Still the MAn.

[Steven.]

Greens just mad cause his car sponosered by ebay BWHAHAHA.

Your Still the MAn.

my car is sponsored by me.

[4gcivic69]

lol thats the dumbest thing i ever heard ^^^^ eaby stickers are just homo.. by the way looks good bro cant wait to see another nice build in the 4th gen forum

[4doorcivic16]

where can i find this seal and oil restricker at?

[plazmascivic]

lol ebay stickers are not homo! they rock! where else can u buy peoples used underwear and shit like that? but ya man u still rockin the side pipe?

[plazmascivic]

lol ebay stickers are not homo! they rock! where else can u buy peoples used underwear and shit like that? but ya man u still rockin the side pipe?

[4doorcivic16]

ono that thing was dumb loud so i got a thremal now.

[plazmascivic]

o ok, i though it was tight, it was original thats for sure, on NFS carbon the skyline can have side pipe exhaust that comes outta the back panels, i think that would be tight.

[TiiM iiS l3eAsT]

lmao hell yea dohc zc turbo ftw!!! i cant wait for mine to be done should be shortly....

[4doorcivic16]

has any one every ordered from osakajdmmotors.com. cuz there slow as fuck. the single cam just started knocking the other day only when you start it up in the Morin. but i put some Lucais oil stabilizer. works good.

[4doorcivic16]

the zc is in baltimore should have it next week. wich is good cuz the tranny blow up today so i started pulling the motor.>

[kyle10182]

wow, dude. u have the best of luck with these cars. when i met u it sounded like there was a marble in the crankcase, now the tranny blew up... im sure i heard about more then this though....rough.

[Steven.]

besure to replace the waterpump, timing belt, and gaskets before installing the new engine.

[kyle10182]

oh yea. and use a honda water pump. not a ebay one. honda pumps use bearings. while ebay ones use bushings. i have an ebay pump on my car and a honda pump in my house. as soon as im off bed rest its goin on there before i start the engine again.

[Steven.]

im buying a honda water pump, oil pump, and all seals(except HG) from honda, timing belt will probabaly be Power Enterprise

[4doorcivic16]

yeah i need to buy some stuff. but i got fired from mr tire so i got to get a nother job first>

[4doorcivic16]

just got the single camn out a now i clean up the engine bay and wire tuck it.

[kyle10182]

just got the single camn out a now i clean up the engine bay and wire tuck it.
fuck yea. u gonna do a real wire tuck? ask me if u got any questions. i've done two. one right, and one wrong. they both work, one just has had to have been fixed 3 or 4 times since. i got pictures on my thread that may help u also.

[4doorcivic16]

alright man you got any idea how you do a mpfi swap i tried and it didnt work at all.

[kyle10182]

well. i did it on my old hatch. i converted to obd-1 and MPFI at the same time with a conversion harness. i actually made a sub harness for my engine that came off of the conversion harness.

[4doorcivic16]

oo i need to find some to help do a MPFi swap. post some pics of ypur tuck.

[Steven.]

oo i need to find some to help do a MPFi swap. post some pics of ypur tuck.

if i could leave/drive id help:cry: :lol:

[kyle10182]

www.boomslang.us is where the money's at for converting. theres a girls gone wild commercial on, and pics for my tuck are on my build thread (picture in sig).

[4doorcivic16]

alright li look andl start doing some turcking tomorrow. as for the harness might just have import sports wire it up.

[kyle10182]

well. if u cant do it, and dont wanna buy the conversion harness, then i guess u dont have much of a choice.

[4doorcivic16]

well i started and i kinda wish i didnt cuz this sucks.

[Steven.]

i dont see why people have a hard time with MPFI conversions.
i though it was really easy

[kyle10182]

u started wire tuck, or mpfi swap? did u get a conversion harness?!?!

[4doorcivic16]

no the wire tuck. when i tried the Mpfi swap i can never get the crank sensor to work. nope haven't got a conversion harness cuz im staying obdo. when you did the wire tuck did you have to extend a bunch of wires?

[4gcivic69]

no the wire tuck. when i tried the Mpfi swap i can never get the crank sensor to work. nope haven't got a conversion harness cuz im staying obdo. when you did the wire tuck did you have to extend a bunch of wires?

did you pull the wires back through the firewall cuz if you do that i think you only have to exrend a few

[4doorcivic16]

yeah then out the side and back up the fender side i got to extend like 4.

[4gcivic69]

oh well i thought you didnt have to extend that many one write up i read said that.. yea it suck real bad i did it to mine it looks alright i didnt run them back through the fir wall just through one of the wholes in the frame.. just make sure you double check all your wirea cuz i forgot one ground for the radiator fan aand one of the wores came loosr and it over heated like a bitch the other day and it sucked tracing all the wires.. just take the time and do it right man its a pain but youll be happy

[kyle10182]

no the wire tuck. when i tried the Mpfi swap i can never get the crank sensor to work. nope haven't got a conversion harness cuz im staying obdo. when you did the wire tuck did you have to extend a bunch of wires?
well. i had to extend a few. probably all of them for the headlights. and radiator fan, but thats it. why not go obd-1 it will make your life better.

[Steven.]

well. i had to extend a few. probably all of them for the headlights. and radiator fan, but thats it. why not go obd-1 it will make your life better.

becouse i sold him a chipped PR4 ECU lol.

[kyle10182]

sell that shit.

[4doorcivic16]

cuz i got a obdo motor. i guess i could run obd1 but what ecu would i run a ls> and what about injectors and all that stuff? yeah most of the stuff it the head lights and fan i have to extend

[kyle10182]

well. u can still use obd-0 injectors, just keep the resistor box.

or wait. u dont have a resistor box, so u can either add one and use the obd-0 injectors or go to crazy rays and get 4 injectors from a obd-1 d-series. they're $8/each. or u can pocket them.

yea, just extend the damn wires. if thats whats gotta be done. i dont remember how much i extended. i just did the shit that needed to be done. i had another car to drive the whole time.

...now its gone :cry:

[4doorcivic16]

idk yet ill have to wait to ill get a nother job.

[kyle10182]

where do u work now? wanna be an electrician? thats what i do.

[kyle10182]

i just posted this on honda-tech to help a friend. he asked how to get the wires into the fender without drilling a hole. i posted this:

pull it back into the car, and then run it out where the speaker wire goes. i think i have pics from my EJ1.

http://img237.imageshack.us/im...0.jpg

to pull it back into the car, the easiest way is to cut the clips off. look at what your cutting and label what needs to be labeled. i dont think any two wires are the same color (except the all black), but u can switch them up, they just ground to those ground "blocks". but if maybe the radiator fan and headlights have the same color wire, just label them with some colored electrical tape.

thought maybe it may help u also.

[4doorcivic16]

:word: where do u work now? wanna be an electrician? thats what i do.
i did work at mr tire but i messed that up. yeah i would like to be a elctrician.

[kyle10182]

u still in high school?

[4doorcivic16]

yeah thats what sucks. only in 11th grade. but i get half days may1 or som shit for work study.
i got one side done and scrubed it down with simple green and it looks fresh as shit. ill load the pics up.

[4doorcivic16]

it came i have pics but i gotta find my cord.

[Steven.]

it came i have pics but i gotta find my cord.
:word:

[4doorcivic16]

well here we go a buch of pics i havent loaded up

got bored so i put my bro 18s racing hearts on lol hoop-D.
http://img167.imageshack.us/img167/1444/picture068fv1.jpg
painted my side moldens
http://img167.imageshack.us/img167/7867/picture073oy0.jpg
http://img167.imageshack.us/img167/7505/picture075uj5.jpg
http://img167.imageshack.us/img167/6886/picture074nm6.jpg
ebay coilovers and blow struts
http://img167.imageshack.us/img167/7033/picture069wq0.jpg
http://img167.imageshack.us/img167/4677/picture070gy2.jpg
pullin the motor
o snd my 91 hatch front bumper fits sedans
http://img167.imageshack.us/img167/7544/picture091lm4.jpg
http://img167.imageshack.us/img167/3413/picture093sn9.jpg
http://img167.imageshack.us/img167/8462/picture094mv3.jpg
the diff in my tranny
http://img167.imageshack.us/img167/5104/picture103mz9.jpg
my yard some of it
http://img167.imageshack.us/img167/1038/picture095zk2.jpg
wire tucking
http://img167.imageshack.us/img167/8110/picture096cp6.jpg
http://img167.imageshack.us/img167/6503/picture097ig1.jpg
http://img167.imageshack.us/img167/7806/picture098nx3.jpg
http://img167.imageshack.us/img167/2046/picture099cy6.jpg
http://img167.imageshack.us/img167/1636/picture100ir9.jpg
http://img167.imageshack.us/img167/4053/picture101ci8.jpg
THE ZC WOOHOO
http://img167.imageshack.us/img167/4820/picture104fb0.jpg
http://img167.imageshack.us/img167/2961/picture105zy0.jpg
http://img167.imageshack.us/img167/9411/picture109bh7.jpg
my msd cap fits nice
http://img167.imageshack.us/img167/5774/picture108lu6.jpg
http://img167.imageshack.us/img167/2125/picture110ox7.jpg
my intercooler and small as piping
http://img167.imageshack.us/img167/4184/picture107qt9.jpg

[kyle10182]

the wire tuck doesnt look bad.

got any "after" pics of the mouldings?

[Steven.]

why such a tall intercooler?

[4doorcivic16]

no ill gets some. later

[4doorcivic16]

i got it for cheap off a friend its dumb tall.

[Steven.]

i got it for cheap off a friend its dumb tall.

more then half will be covered, so it wont be very efficiant

[4doorcivic16]

yeah i know i didnt know it was that tall till i got it. i was going to get a 30''long 6'' tall but my other friend sold it.

[kyle10182]

well thats not much of a friend. now your stuck with a dumb tall intercooler...

[4doorcivic16]

lol yeah owell

[Steven.]

sell it

[4doorcivic16]

how tall does it look in the piC?

[4doorcivic16]

its ready to go in>

[Steven.]

its ready to go in>
:thumbs up

pics

[kyle10182]

:thumbs up

pics
:nopics:

[4doorcivic16]

lol i will tomorrow

[kyle10182]

hey, man. you have two 14'' wheels with GOOD tires? steelies are fine.

[4doorcivic16]

i got 13s ive been looking for 14s every were

[Steven.]

my moms got soem 15" stellies with no tire in the garage, bran new, still in scion box

[kyle10182]

i need two 14'' tires for inspection


still no pics?

:nopics:

[4doorcivic16]

well i got it in as much as it didnt want to. i got pics but i cant find my god damn cord.

[kyle10182]

well i got it in as much as it didnt want to.
whats that mean?

[4doorcivic16]

its was the most pain in the ass motor swap ive ever done.

[Steven.]

easiest ive ever done

[Steven.]

pics? updates

[4doorcivic16]

yeah its fucking junk i hate fucking dpfi cars.

[Steven.]

lol.

MPFI is seariously like a 30min job.

[4doorcivic16]

i dont know how i fuck it up every time

[Steven.]

are you looking at the connectors on teh right side?

[4doorcivic16]

i think when you look at the pin out thats the back right?

[4doorcivic16]

http://img405.imageshack.us/img405/6476/picture061lq6.jpg
http://img405.imageshack.us/img405/9818/picture062ww1.jpg
http://img405.imageshack.us/img405/8617/picture063xt0.jpg
http://img405.imageshack.us/img405/1372/picture064vv2.jpg
http://img405.imageshack.us/img405/1806/picture065hw0.jpg
http://img405.imageshack.us/img405/6325/picture066ay8.jpg
i didnt take the last 3 pics

[Steven.]

i woudl have just spent the $40 on the mount inserts lol

and what ever BOV you put on, i bet will hit the hood with that flange

[4doorcivic16]

im thinks about a hks one lol yeah im not running this intercooler or piping its sucls/

[Steven.]

its HUGE, that intercooler

[4doorcivic16]

11/5 inches huge

[plazmascivic]

ya way too much chrome on the pipes. lol and they are huge

[kyle10182]

yeah its fucking junk i hate fucking dpfi cars.
:lol: when i converted i also converted to obd-1 and the wiring took me about 3 hours. but that was cutting the stock harness and running the new injector, vtec, etc wires inside.


so i see you have a header. and an interfooler. nice.

[4doorcivic16]

:so i see you have a header. and an interfooler. nice.
yeah it makes the air 99.9% cooler lol and gives me about 60 more hp

[kyle10182]

nice.

[4doorcivic16]

well im not getting and resistance to my injectors. i plued a clip of and put a point in one wire and the other on the other wire and i crank it and its not getting anything

[4doorcivic16]

got it started got a code 7 and 9 no biggey but i think i need a water pump mines make a nock like my old one did on my single cam.

[kyle10182]

thats the kinda stuff u really should replace before it goes in the car. especially before you boost.

[4doorcivic16]

yeah but didnt have the money.

[4doorcivic16]

took her to the track today best time was a 15.7 clutch was slipping bad and a code 8?

[kyle10182]

took her to the track today best time was a 15.7 clutch was slipping bad and a code 8?

oh shit! my buddy was at the track and he called to see if i was coming. i was at work though. he told me it was a great turnout!

[4doorcivic16]

yeah there were a lot pf people plus ops cars it was fun.

[kyle10182]

yeah there were a lot pf people plus ops cars it was fun.

OPS, huh?

Is that "Old Pieces of Shit?"

i got that from a friend.

[slowcivic E G]

OPS, huh?

Is that "Old Pieces of Shit?"

i got that from a friend.

who told you that kyle? O P S

[4doorcivic16]

well driving down the road the other day i had 2 of my lug studs brake off and rip the threds off the other causeing my wheel to fall off and messing up my fender and while trying to get it home my clutch shit out on me. so the 4door is down for some sleep time for now.

[4gcivic69]

geez that sucks man you just dont seem to have such great luck.. get it fix though and get that turbo setup together man

[kyle10182]

jesus christ.

[Rex_89]

be happy it wasnt like this....

http://www.teamjamoto.com/dixeregionpage.htm#v8301600

[4doorcivic16]

lol that would of sucked. yeah i dont think my 4door likes me or maybe just hondas in general cuz ever one ive had something bad happens

[4gcivic69]

maybe you should try and get a coupe since you havent had one of those.. maybe thats the answer to all your honda problems

[4doorcivic16]

you mean a hatch cuz i got one but its in the inpund for sitting with no tags> and like 400 to get it out

[kyle10182]

u could always buy my coupe. i want like $1200 but i'd take payments from you cuz you're local. CLEAN body. and i could include some aftermarket b-series mounts for a tad extra.

[4doorcivic16]

your selliing it?

[kyle10182]

yes sir. if you are interested, i can PM you all the info. and reason for selling.

[4doorcivic16]

http://img507.imageshack.us/img507/6915/nicks068mj2.jpg
real hks bov ebay wastegate and side mounts thanks green91
http://img507.imageshack.us/img507/8979/nicks069ik3.jpg
what happens when your wheel falls off
http://img507.imageshack.us/img507/6387/nicks062sq1.jpg
got a mig welder
http://img507.imageshack.us/img507/4710/nicks070pn3.jpg
picked up som si seats thanks to shanke_shit and green 91
http://img507.imageshack.us/img507/8762/nicks071om8.jpg
http://img507.imageshack.us/img507/7475/nicks072gr7.jpg
http://img507.imageshack.us/img507/8861/nicks073mj3.jpg
http://img507.imageshack.us/img507/3628/nicks074wo6.jpg

[4doorcivic16]

if anyone cares i weighed my car tonight at the truck stop 2180 with out me and 2360 with

[plazmascivic]

nice i need to do that some time

[kyle10182]

are u trying to tell me that you weigh 120lbs?!?!?

[4doorcivic16]

do i look like i wight alot lol sike i for got the 6

[4doorcivic16]

o yeah i got a set of da gsrs lol really clean

[Steven.]

da gsrs? liek the ones on my crx?

[kyle10182]

thats more like it.

[4doorcivic16]

da gsrs? liek the ones on my crx?

yup

[Suanico]

dude what the fuck is up with the poster size pics

[DEEGORILLA06]

the front wheels are mad jdm yo! blk with a 1 1/2 inch bronze lip....

[4doorcivic16]

lol only that wheel is the other one is black. yeah its a beater im getting new lug nuts, wheel studs fenders and a hood. putting all my gsr's on and starting some body work.

[Ominous G2]

o yeah i got a set of da gsrs lol really clean

Think you mean DB2s.

[4doorcivic16]

is that the code for old integras?

[4doorcivic16]

thinking about pulling the dohc zc and selling it.any takers?

[kyle10182]

heh. b-series?

[4doorcivic16]

i like my ls better. zcs not a bad motor but idk just doesnt feel the same.

[Ominous G2]

is that the code for old integras?

DA9 for G2 tegs, DB2 for G2 GSR tegs.

DB1 for G2 four doors.

[kyle10182]

i like my ls better. zcs not a bad motor but idk just doesnt feel the same.
good man.

[4doorcivic16]

http://img72.imageshack.us/img72/9947/img3645sj7.jpg driving that shit

[4doorcivic16]

well finally got a job and a daily driver so i can save my money for my new set up im going back to a ls turbo and got da integra brakes for all around. need to start some body work and stuff. im going to e pulling the dohc zc out here in the next month or so and sell it. but thats the plan for right now>

[4doorcivic16]

zc is out. re doing wire tuck painting and fixing all the rust. puting a 6 point in, then going to put together a motor.

[kyle10182]

i dont think i've ever seen a caged ef sedan.

[4doorcivic16]

lol thats why i want one plus my friend gets them bent up for cheap

[kyle10182]

really, can he bend exhausts too? tell him i may be able to get some side work if he wanted.

[Steven.]

zc is out. re doing wire tuck painting and fixing all the rust. puting a 6 point in, then going to put together a motor.

i wouldn't use the flux core to do the cage btw

[kyle10182]

i wouldn't use the flux core to do the cage btw
excuse my ignorance, but by flux core, do u mean MIG welding?

[Steven.]

excuse my ignorance, but by flux core, do u mean MIG welding?

Flux core is not actually MIG welding.

MIG is welding with gas, Flux core is no gas.
http://www.lincolnelectric.com/knowledge/articles/content/migvsfluxcored.asp

some good welders you can do both, by changing a few thing inside(made like that)

flux core is in a way mig, but not really,

[kyle10182]

so by flux core, u mean something like stick welding?

[Steven.]

no, flux core is still on a wire spool, just welding with no gas.

stick or ARC welding is totally different then wire feed welding(MIG/Flux)

i have this welder
http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200311890_200311890

i can do both, gas MIG and Mig Fluxcore.

i aslo have a cheap harbor fright welder, i cannot use gas or regular mig wire on it.

[4doorcivic16]

lol im not welding it in my friend is. and deff not using flex core my cage would fallapart

[4doorcivic16]

flue core has the gas in the wire so you dont need to use argon>

[4doorcivic16]

as she sits fro sale damn i change my mind alot

http://img98.imageshack.us/img98/5296/picture007dy7.jpg

http://img98.imageshack.us/img98/3567/picture009gk3.jpg

http://img147.imageshack.us/img147/8440/picture010mx0.jpg

http://img98.imageshack.us/img98/6506/picture011fc7.jpg

http://img98.imageshack.us/img98/6245/picture012aw8.jpg

http://img147.imageshack.us/img147/4578/picture013im9.jpg

http://img98.imageshack.us/img98/2819/picture014ds5.jpg

http://img98.imageshack.us/img98/8076/picture015dt7.jpg

[kyle10182]

did u go back to a ZC, or just never swapped the original one out?

[4doorcivic16]

had it out for a while trying to sell the motor but no takers so i put it back in to sell everything

[kyle10182]

oh yea? whats your plan then? u buying a Chevy Tahoe?

[4doorcivic16]

lol no im looking for a ed hatch. for a side build not a dd so somthing will get done insted of beating it up.

[kyle10182]

oh man. a friend of mine has gone and looked at like 4 of them in a week. i dont know where he's been finding them though. all for under $1k.

[4doorcivic16]

not bad im looking for a si through i want a damn car with a sunroof nad i dont want to deal with all the mpfi again.

[kyle10182]

yea, i understand that. honestly if u plan to convert to obd-1 or obd-2 for your project dont worry one bit about DPFI. conversion harnesses make it VERY easy.

i'd rather have an Si CRX, but its cool.

[4doorcivic16]

sold her

[kyle10182]

what the sedan? thats cool.

[EF Honda EF]

as she sits fro sale damn i change my mind alot
http://img98.imageshack.us/img98/5296/picture007dy7.jpg

Whats the deal with the wire tuck? I saw you ran some wires through the fender well but there are still clips in the engine bay.
Flux core is not actually MIG welding.

MIG is welding with gas, Flux core is no gas.
http://www.lincolnelectric.com/knowledge/articles/content/migvsfluxcored.asp

some good welders you can do both, by changing a few thing inside(made like that)

flux core is in a way mig, but not really,
Kyle, its the kind of welder i have. It feeds the wire out but no gas is used.
what the sedan? thats cool.
Yea he sold it to that really tall guy ED. Its a sweet car just needs a little work.

[4doorcivic16]

it was a pain in the ass so i put them back there

[zach246]

i want that red crx lol

[4doorcivic16]

what funny is i sold that thing for 500 bucks