theres alot more to make ur car turbo than what you have... hope ya know that...
I'll figure it out!theres alot more to make ur car turbo than what you have... hope ya know that...
no disrespect but It's not a blower it's a turbo.x2 do some "beefing up" before u put the blower on, or else u could do some major damage
no disrespect but It's not a blower it's a turbo.
Yeah the motor is getting beefed up! however, you can run a turbo on stock connecting rods!
I don't know why anyone would take that chance! I've been around cars for 11 years & never have I seen a connecting rod so small!
but why woudl you, eagles can be had cheap. or tuner toys rods
What don't make sense! turbo's trive in a small port environment, on the other side of the spectrum N/A trive with larger ports. Second I'm not running the hf manifold because I want to. The turbo I have is a mits twin scroll. aka instead of the rectangle for the exhaust intake, there are two triangle shaped ports. So, it's was either a custom exhaust manifold with a evo flange or modify the hf.vitaras with a stock intake manifold and HF manifold?
dosent make sense to me.
vitaras are more used for high boost/high HP numbers. not low boost.
since the CR will be low, it will probably be a slug out of boost.
all the calculations I have say 9.14:1 with Z6 head & block 75.50mm bore & 2-layer Y8 Head Gasket. complete stock d16z6 comes in at 9.13:1 on http://www.cspeedracing.com/howto/compcalc/compcalc.php. I may be getting someting wrong but that's what I come up with. The only thing that could be wrong is the compression height, it is 30mm on the vitara's right.with vitaras?
in a z6 there abotu 8.8:1
im mean there damn good pistons for being cast and not forged.
people make 400+hp with them on stock sleeves
I am, I found a place online that makes custom copper gaskets for around $90.00id reccomend a upgraded head gasket.
ill be pushing 300whp on my DOHC ZC, not sure what psi it will be at im guessing aroudn 15-20
really? no f**kin way i never knew that, haha it was a figure of speech god all u guys need to get a sense of HUMOR JESUS f**king CHRIST!no disrespect but It's not a blower it's a turbo.
you can get a cometec. i woudlent use a coper HG on a honda block, i havet heard good things about them.I am, I found a place online that makes custom copper gaskets for around $90.00
really, sounds like a fun project. If I had the money i'd be doing something like that! this is my cheap turbo setup until I get out of school! Are you sleeveing the block with that hp goal?
what the f**k is with your attitude lately?really? no f**kin way i never knew that, haha it was a figure of speech god all u guys need to get a sense of HUMOR JESUS f**king CHRIST!