96-98 Civic OEM Clock

NOFX

I'm NOT eran!
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
ImportFan1 said:
where do the wires get spliced into and what wires go where?
http://www.clubcivic.com/board/showpost.php?p=1432432&postcount=77
NOFX said:
EDM/JDM Clock Install into 6th gen (96, 97, 98) Honda Civic

Okay, all you have to do is remove your climate control/radio bezel from the car. The clock slides in from behind and fits in with two screws. The screw holes are not previously threaded, but that shouldn't be a problem.

The little blue plug on the back of the clock will have four wires coming from it. Battery (white & blue), ignition (yellow), dimmer (red & black), and ground (black). I'll be wiring these into my radio wiring harness.

On the radio wiring harness the wiring should be as follows: Battery (yellow), ignition (red/red & black), dimmer (orange), and ground (black).

Code:
[b]Function	Clock		Radio
Battery[/b]		white & blue	yellow
[b]Ignition[/b]	yellow		red/red & black
[b]Dimmer[/b]		red & black	orange
[b]Ground[/b]		black		black
 

NOFX

I'm NOT eran!
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
kabulski said:
Anyone got a pic of the JDM interior of the 96-00 2 door civic?

I need to see what I am missing out on and what I should be looking for
JDM EJ7 coupes:



 


NOFX

I'm NOT eran!
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
I got mine for free. :P I even know it's history.
 


ImportFan1

Super Moderator
Staff member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
Thanks Amy. Sorry I missed it.
 

NOFX

I'm NOT eran!
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
No problem.

I have a good friend. =)
 

K2_civic

Fo-drizzle!!!
Registered VIP
5+ Year Member
NOFX said:
JDM EJ7 coupes:



I can ge this stuff to fit in my interior, just pieces of it at a time, or do i have to do the whole thing at once and where should i start looking?

I'd like to move to japan, and make a right drive civic with all USDM parts, that might make me badass over there

websites to buy for the JDM coupe parts?
 

VTi_ME

New Member
Registered VIP
5+ Year Member
10+ Year Member
15+ Year Member
kabulski said:
I can ge this stuff to fit in my interior, just pieces of it at a time, or do i have to do the whole thing at once and where should i start looking?

I'd like to move to japan, and make a right drive civic with all USDM parts, that might make me badass over there

websites to buy for the JDM coupe parts?
ME lolzz
 

NOFX

I'm NOT eran!
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
kabulski said:
I can ge this stuff to fit in my interior, just pieces of it at a time, or do i have to do the whole thing at once and where should i start looking?

I'd like to move to japan, and make a right drive civic with all USDM parts, that might make me badass over there

websites to buy for the JDM coupe parts?
The coupe parts are pretty much like the other trims' parts. Some of it will fit, some will need modification. You're not going to get the center vent without getting the entire dash though, which also would mean you'd have to swap to RHD.
 

K2_civic

Fo-drizzle!!!
Registered VIP
5+ Year Member
NOFX said:
The coupe parts are pretty much like the other trims' parts. Some of it will fit, some will need modification. You're not going to get the center vent without getting the entire dash though, which also would mean you'd have to swap to RHD.
Fook That!
 

imbcruz

ItsMeBraulio!!
Registered VIP
5+ Year Member
10+ Year Member
15+ Year Member
this tread was from back in the day.. damn a little late
 

NOFX

I'm NOT eran!
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member


Top