i changed my gauge cluster and while i was seeing if everything was working i discovered my head lights weren't working but my high beams work i checked the fuses and they were good and my radio comes on and functions but cant hear anything?
check fuses again, sound like a fuse problemi changed my gauge cluster and while i was seeing if everything was working i discovered my head lights weren't working but my high beams work i checked the fuses and they were good and my radio comes on and functions but cant hear anything?
dam that werid man,i replaced the fuses and it still doesnt work
failure to yield to traffic. you can get a ticket for that.i actually had the same problem in my old car the low beams would not go on but the highs would so i had to drive around with my highs at night just so i could see and not get a ticket. i never figured it out. so if you do let me know.
if thats the case then look and see if you have a ballast. if you do then hes not bsing you. some hid kits ore only single beam and to get highs and lows you would need a duel beam.i called the dude i bought the car from and he said that i have an hid kit that doesnt have low beams? i dont know if he was just bullshitting me but i took out my radio and the connector was loose thanks for all the help guys
you might be right with the single beam thing but there bright as s**t i dont wanna get pulled over for some dumb s**t like that hahif thats the case then look and see if you have a ballast. if you do then hes not bsing you. some hid kits ore only single beam and to get highs and lows you would need a duel beam.
if it was aligned right you should be fine. brights point out more to show the road better where as your lows will point slightly down do not blind oncoming traffic. take it to a shop and have them check the alignment.you might be right with the single beam thing but there bright as s**t i dont wanna get pulled over for some dumb s**t like that hah