unix4linux
New Member
Hendo,
Here is a pic of the vtec pressure switch
As you can see, the little green clip right by the distributor is the pressure switch. You'll notice in the picture, right next to the green pressure switch clip that there is a red wire that then kinda turns yellow (that's because I had to extended the wire). That is the wire that goes to A4 on the ECU, which is the vtec Solenoid. The green clip has two wires, one that goes to D6 on the ecu and the other, which is ground. The ground can go anywhere you have good ground contact. Search for some good ground with a multimeter.
Hope this helps
Here is a pic of the vtec pressure switch
As you can see, the little green clip right by the distributor is the pressure switch. You'll notice in the picture, right next to the green pressure switch clip that there is a red wire that then kinda turns yellow (that's because I had to extended the wire). That is the wire that goes to A4 on the ECU, which is the vtec Solenoid. The green clip has two wires, one that goes to D6 on the ecu and the other, which is ground. The ground can go anywhere you have good ground contact. Search for some good ground with a multimeter.
Hope this helps