Search results

how does the ecu have somthing to do with the radiator? can you describe the noise? i dont think the radiator would be making a noise.

ill prove you wrong my 93 has a bleed valve bc i had to do it when i changed my rad. and thermostat.

to bleed the system all you do is jack the front of your car up in the front if you have ramps that's works great. wait till car gets to operating temp. Then slowly open the bleed valve which is located by the top radiator hose. I believe its a 12mm. Slowly open it coolant will come out. i...

replace motor. you can get a cheap jdm d15b vtec with 45k miles on it.

yes you will sound like a ricer. They usually come with a silencer so i say go ahead and get it. Thats what i buy. The silencer makes it sound quiet.

ya but what i was saying its not always the sensor. I thought so also i replaced it still didnt work so i investigated and it turned out to be the guage itself.

i understand that. its really good exp. ive just seen ppl who rebult their motor and didnt properly brek it in and blew it up. anything can go wrong just make sure you take your time and i would go by the chilton book. its really an easy thing to do. i wish you luck keep us posted.

no the 92-95 civics have a speed senor. is your odometer or trip meter working? if so your guage is bad. dont worry i went through 2 of them already. Most likly if it works somtimes its the guage. but check and see if odm. or trip meter are working. If not then its your sensor. 70 dollars hope...

just a question why spend money on a rebuild kit when you can buy a jdm d series motor for bout the same price your gonna spend on a rebuild? rebuilding is a good way to learn and gain exp. but if done wrong you can blow motor. Im wishing you luck and keep us posted.

rattle can is when somone spray painted it. fpr some reason i like those paint jobs. ppl say ont rattle can your car but ive seen cars that been rattle canned look better than a factory paint job.

easy way to tell if it has vtec is if the spark plugs are in front of the valve cover it is vtec if they are towards the back its not. the dx came with the d15b7 which i have and it has 102 hp and 98 pounds of tq. Now if you want to beat hime with a really cheap swap get a jdm d15b vtec motor...

personally i like the paint. Is it rattle can?

if you get the car cheap and you dont have a budget just put an ls swap i there or just put a jdm d5 vtec b18b1 142hp 126 pounds of tq. d15b vtec 130 hp 107 pounds of tq i have a site where you can buy a jdm vtec for 780 plus shipping and all you have to get is the ecu everything else comes with it.

i just got my aftermarket steering wheel. I cant figure out to get horn to work. The steering wheel hub has a red wire attached to it. is that the ground? and all i need to do is run a power wire? if so where should i run the power wire.,

do you have paypal? if so message me your email and ill will get money sent and ill message you my address ill prolly sent it in the next couple day ive been real busy.

Im not an expert about steering components. but could it be the axles?

Welcome to the site. My opinion i wouldnt bother trying to build the b7 not worth the money. Im just going to go stock b15b vtec with a tuned ecu. wont be the quicket but it should pull pretty good in my 2000 pound cx.

ya i just basicly need the pins that are in the connectors. Those are removable right?

did u read the rest of the post. I DONT NEED THE PINOUTS. thx for helping anyways. i need the plugs which civic virtue helped me out.

ok and how much for the parts. lol ya Versailles is actually a city in France. but pronounced differently.