Search results

is there a How To thread on installing S2000 seats in an EK?

You need to provide more information on what you want to accomplish and what parts you have to work with.

I have 2 10" Audiobahn Flame Q's and im powering it with an Audiobahn A8002T. Here are the specs for them. Model: A8002T Class A/B MOSFET Circuitry 2 - Channel 2 Ohms Stable Stereo 2 x 200 Watts RMS @ 4 Ohms 2 x 400 Watts RMS @ 2 Ohms 1 x 800 Watts RMS @ 4 Ohms Air Intake Cooling Fan 18...

Wassup CC. I have a question about wiring subwoofers and Ohm's law. I know how to wire a sub to 1,2,4 ohms but what I don't understand is, what are the differences between running subs at different ohms? So, does running subs at 1 ohm as opposed to 4 ohm make the speaker sound better? more...

nice post. I had to do this 4 times already. This would have been extremely helpful for me 7 months ago.

I'm with stealthy, build your own. It shouldn't be hard. Just go to Home Depot, buy a piece of plywood and cut it to size.

Yeah this happened to me like 4 times so far. It's really annoying. So where can I get rubber lube to prevent this from happening again???

Is there anyway you can scan the diagram for the wiring harness that you got from Crutchfield. That would help a lot. Thanks.

I believe it is 2.25". Don't quote me tho, im not entirely sure. Maybe do some research on headers and get the specs on the opening. peace.

I was wondering if anyone had any experience installing 6.5" components up front that are connected to an amp. I saw the How to but they used the stock wiring. I need to run new thicker 14&16 gauge wire from the doors to the cabin of the car. I was wondering if anyone any tips on how to get the...

above the hump is where its suppose to be. It should fit good there, the thing i had a problem with is drilling the holes for the screws in the wheel well. I didnt factor in the slant on the sides and it looks straight! ahhhhh! ive been lazy but i have to do it again. Just something to keep in mind.

Sup fellaz, i need help with something. I want to hook up some neon rings around my subs and i was wondering where to find the power source in the trunk. I was thinkin about just slippin the + and - into the amp but im not sure if thats such a good idea. is there something that i can build like...

when i'm going about 80 in my 00' Si it about 4500. So its about right.

streetstyler.com has specials on ABS plastic lips. IMO abs plastic is good enough becuz i dont plan on crashing. know what i mean. peace.

in the corner of the window there should be a little slot for tweeters. ( i have an Si, i dont know if you have the tweets) Remove that corner piece (its a clip so just pull it out, careful not to break it) and there will be 3 screws you need to take out. Be very careful when removing these...

i had the same problem. What i did was drill 2 more holes to the left and right of the exhaust slot and tightened it until it gave enough clearence. It's a looks a little off but barely noticable. However, sometimes the exhaust swings and touches the lip. But no major melting, only where it...

My friend had the same problem. You'll either need stiffer shock and springs or you'll need to raise it. Considering that you already have suspension work done you might want to get coilovers or get some thinner tires. My friend got stiffer shocks and it helps somewhat, but the problem didnt go...

I have a greddy sp and its pretty deep when you get on the gas. Its quiet when your just driving the streets. Just how i wanted it.

My front lip is cracked. ( don't ever trust anyone else to drive your car! even your GIRL!! ahh) And i also have to fix the rear lip. Its not sitting right and the exhaust is really really close to it. And i gotta fill in the center caps cuz the rota black ones are nasty! Also going for...

a little sneak peak of my 2000 EBP Si. Almost Finished...