Search results

you must press and hold 6 and 4 together before the apple logo... if you are using mac osx 10 or snow leopard it should work fine...

also if you want to use 64 bit mode, you can hold the keys 6 and 4 down when the computer boots right before the apple logo comes on, then release the keys. to verify youve entered 64 bit kernal, click the apple button on top left and hit about mac, then hit more info, when system profiler...

does the window shudder when going up or down? sounds like window maybe off track.

jack the rear up and place jack stands underneath. then remove center console. get out 12mm wrench and have the parking brake clicked up once. then behind the brake handle there is a cable wire with a nut on it splitting to 2 cable wires, start turning the nut with the 12mm wrench. only do a...

fail

you fail.

here i looked up the citation code for you and here is the vehicle code under it. must have pdf viewer to view this file http://www.dmv.state.pa.us/pdotforms/vehicle_code/chapter33.pdf look under SUBCHAPTER F Speed Restrictions btw may i ask what county this occured in?

Hey, well im running out of space on my iram so i bought another iram but now i need memory. if anyone has ddr 184 pin 2 gig(1gbX2) or 1 gig sticks that they are willing to sell, let me know please

maybe he got a head without the solenoid???

i have a manual iacvalve if you still need one let me know

its the same thing the d16z6 wires will fit your y8 motor.

you have to be driving thru a creek or really deep puddle or something to get that thing to suck enough water out... if the filter is partially submerged it will not suck up water. maybe a drop or so but not enough. the air above water will go in first. the filter would have to be fully...

that is not where the o2 sensor connector is... and the o2 sensor has to be pulled thru the top. connector does not fit in. as to the op. pull of center console, look under the bracket that has ur cup holder or so. it should be clipped onto the bracket on the drivers side. the connector will...

theres another thread on the same page in this forum about an idle problem.

lancaster area cops are gay. i used to live there. me and my friend got pulled over because they got a tip that a same colored car was involved in some other incident so they held us there until they could get more info from the dispatch ppl. then the cop said you know ur headlights and exhaust...

im not going to get in an argument over this but reading does not own me. i simply stated cause low idle. like PhntmSk8r said, idle changes from different variables to whether its user input or outside environment or the engine. moving idle speed is higher than stationary idle speed, so 400 rpm...

incorrect ignition too far advanced will cause low idle.

he said he changed that.... try cleaning out the IACValve. remove iac valve spray carb cleaner on it to remove buildup on the filter part and other parts. reinstall and test. also check the ignition timing. make sure it is set correctly.

meh makes you 10 times faster cool purging colors and best of all it lasts like 2 hrs. lol but seriously N2O is only good if you have corresponding mods. sure on stock motor it can add a little but it wont do much. gets too expensive for something small. put some high cr pistons in, arp...

in the detailed diagram above lol, the part circled in red is rear main seal. once you take the stiffner off and the flywheel cover shine a light up behing the flywheel and see if its leaking there..