Search results

I was told on another forum that the GE manifolds were for big power only, and that they were only truly effective over 500 whp. But I can't really find much to back that up. -TAG

That's awesome do you have any knowledge of the venom or golden eagle manifold? I am currently torn between the victor x and the style of the GE and Venom Thanks for the help, much appreciated -TAG

??? I'm going to turbo and the intake will be staying on the car, I'm just looking for something that will be on the boosted set up that will give me some mild gains before it gets boosted. I'm looking between the golden eagle/venom style now and the victor x -TAG

There is also the Endyn one which I'm sure will be quite expensive, I'm researching it now to see some specs and information on it. -TAG

I am in the process of purchasing a B18c1 that will be run basically stock for the first year and then boosted later on. I'm aiming for the 450 - 500 whp mark or there abouts and was wondering what intake I should go with. I currently am running a Skunk2 pro series intake on my D series and I'm...

Time I took everything out of the engine bay and repainted everything and then reinstalled it, this whole process will be done again when the turbo setup is installed. As for the undercarriage it was a little cleaning but not a lot (not in my mind, most people thought I was nuts) and all...

a GT3071R for my built D series, I'll find my old thread and reply to this one. I was originally going to go for an externally gated turbo because I was told they flowed better, but I am able to pick up this turbo brand new off a local guy who's dreams were bigger than his wallet's at a very...

Can I just bolt the Manual Steering Rack into my stock subframe though? -TAG

I want to put a manual rack in my car but I was told that you have to swap the sub frame, and after doing some more searching I read that they just swap in. So which is it, Can i just get a manual rack off a 5th gen civic and put it in my 95 Civic Coupe EX that came with Power Steering? is...

I'm from PEI, and I'm not sure abotu vtec on a B16 but my D16 is around 5500, you just remove the two bolts from the housing and unplug the sensor, and then it just comes right off, pretty easy to take off and the screen is part of the gasket so that just pulls out

If you remove the Vtec solenoid you will see a small rubber gasket that has a screen on it, if the screen gets clogged due to oil deposits your vtec will no kick in on time it will be late due to decreased oil flow. Pull the solenoid off and have a look at the screen if it's not clean then I...

Seats Well I got rid of my old seats and put in a set of 2000 Integra seats. I like the look of these seats a lot more than the stockers. Took a bit to clean them up and had to completely take them apart since they had gotten wet and the frames were starting to rust so they were all cleaned...

I drive a 1995 Honda Civic EX Coupe Currently rocking the original motor, a D16z6 A quick list of mods: Exterior Wings West W-type Body Kit (Was on the car when I bought it, I don't hate it but I don't love it either, may swap original bumpers back on it) Red/Clear Taillights Black Housing One...

Next box of mods for this year. A much needed change to my car, it's filthy but the tails look awesome, still need to do some fitment, they were just thrown in there for the pic. Many more boxes to come

2007 Season Well making a few changes for this year. First palet After I started doing my thing with the first palet

Think they come with a 19 mm front bar. -TAG

I was thinking about getting front and rear Suspension Techniques sway bars, ASR brace, and Blox LCA's I will be upgrading the dampeners next year, just is not in the cards this year. I was doing some reading around and researching and one person mentioned to me that the ST sway bars hang too...

I'm here very rarely but I'm still around. -TAG

I believe I got this picture off this site a while ago, but I can' t seem to find wheels like these anywheres. can someone help me out in identifying them? -TAG

I was looking through the nicest 6th Gen thread and found this picture I was just wondering what type of wheels these are. I tried to PM him but his in box is full. Does anyone have any ideas? -TAG