Search results

Hey guys, I've been a member on this site for a long time and I'm looking to sell my car. It's a 1993 civic hatch with a jap spec h22a matched up to a y80 via 1/2 over evolution kit. Its got so many new parts on it it would take forever to write right now. 113k on rust free body. About 500 on...

I have a 97 d16y8 that needs rebuilt. Guilty culperit was rod bearings. It has eagle cams and rods, and comes with nearly everything you'd need for a fresh rebuild. The engine is tore apart into pieces but I'd rather sell the whole thing at once. You can contact me, Dave, at...

I blew my d16y8 and need a new one. Cant seem to find one on any site. Would love some help if you have one or know a link. My honda knowlege is rusty but as far as I remember any d series engine will match up to the tranny, but Im not sure bout the ecu. Just want the same engine though. Have...

Update, car was still doin it. I work near my house so I would deal with it, until one day it wouldnt start at all, it turned over but wouldnt start, shipped it to Honda and they couldnt figure it out either, and didnt want to "waste my money" to figure it out, so now its back home but I dont...

Its been bogging out on me, for reasons no one knows, when I push the gas it putters, thing is it really only does it when its warm

I have a d16y8 and I dont know whats wrong with it so Im going to pretty much be replacing everything, I'm gonna need a map sensor, and a pcv valve for now. I live in Pittsburgh, if that helps

parts needed I have a d16y8 and I need a bolt that holds the fuel rail on, two exhaust header bolts, on the top 2nd one in from the left, on bottom, 2nd one in from the right. Also need a map sensor, pcv valve, and others probably. I live in Pittsburgh

I dont feel so stupid now, cause I took it to Honda cause I needed it fixed quick, they couldn't even figure it out, and they supposedly have one of the top four mechanics in the country. By the way, I reset my ecu and now I am gettin code 14(IACV), a totally new code, and 72(missfire), the...

Just got it back from the shop and they are just as baffled as I am. Compression is good still so thats a plus Dont know what to do now but take it to honda, I could spend hundreds of dollars in sensors, but I think its bigger than that

Gotcha, my boss said the same thing actually, that will probably be the first thing to replace, takin it to my shop guy today to get a final verdict. Im not goin all weekend without drivin. Any guess bout all the cylinders misfirin? Distributor, Timing?

By the way I dont have a cat just the resonator, dont need to where I live right now. No 02 sensors goin off though, odd cause only ones hooked up and the other is wrapped in tinfoil, ha

Just ran the codes, pullin up 3-Map sensor, 7-Throttle position sensor, 10-Intake air temp sensor, 45-fuel system too rich too lean, and missin on every cylinder, whats the prognosis

ok checked a bunch of s**t. Bought fuel pump and filter, fuel pump is goin back its fine, filter is dirty, its stayin, movin forward. Dismantled fuel rail to check injectors, f**ked with soot, why?, cleaned em up with some carb cleaner, move to intake, destroyed, wet with soot, figurin my...

Okay well, I checked the plugs, they were carbon covered but dry, and it is idling fine when it can so Id say ignition is okay, however my new msd distributor cap terminals were beaten up and coroded more than I would have liked to see. I let it sit all day and started it and it seemed to be...

I have a 97 d16y8, with god knows how many miles. I thought I fixed this problem by replacing my MSD cap and wires, and new plugs but its back. When I go to punch my gas it boggs out, I can catch it from stallin completely but it doesnt help the fact that I cant put the rpms past 1k or...

heres the bumper they sent me, hope it helps. Okay how do you do it again?

I own a 97 Civic Cpe and I just got a front bumper off of ebay from a dealer named D & H Auto Parts, and it doesnt seem to fit. It appears to be a couple inches too wide and I cant pull it in. Isnt the 99-00 bumper a bit larger? Can anyone measure their bumper from the top of one side where it...

how much for the wheel and pillar pod

Bump, I need this car gone, its blocking my garage

is it painted or is it the plastic black