Search results

The pedal goes all the way to the damn floor! I've replaced the MC and BB, and the rear wheel cylinders cause they were leaking, so i know i had lost pressure there. I bled the brakes (in correct order) until no more air was visible, checked the check valve and everythings seemes ok, but the...

well i just checked the wheel cylinders and i dont see them leaking anywhere. they would be leaking from the rubber seals, correct? next step is to rebleed the entire system and i'll let u guys know what goes on

I only bled the brakes once and then it got dark out, so they may need to be bled several more times. Yes i bench bled the master cylinder and it brand new. i'm almost positive i have no leaks. As of now i'm thinking the culprit is the wheel cylinders for sure or they just need to be bled 2 or...

Ok. i just recently bought a 92 civic VX and the brakes were shot when i bought the car. The pedal goes all the way to the floor!! So i changed out the MC and BB and bled the brakes, but still the problem exists. When the car is off the pedal will get stiff but will slowly go back to the floor...

I just bought a 92 vx hatch. its got the D15Z1 in it but its got a vtec head (pretty sure its vtec-e cause it has an EGR valve) and a P07 ECU. its throwing a CEL code for oxygen sensor, but i really need to get this car inspected so i can start building my ED. so i was thinking that i could get...

Skunk 2 Pro C or Tein SS for track use. opinions please!

Intake/Header/Exhaust!

Apexi world sport 2 takes the cake in my opinion!

I was looking at geting some gearspeed carbon coated syncro rings as replacements for my D-series tranny. They are only about $275, which aint too bad, but I wanted to know if they are worth it? has anyone used these before?

you must be a noooooooooooooooob

I'm with that dude +1

(the original motor was cable and the new one out of the 98 ex is electrical and its something you screw in on the top of the transmission??? no clue there.) My bet is that it's the vehicle speed sensor. the old hondas had a cable driven(mechanical) vss, but the tranny in your car is an...

Do you have an S20/P20 transmission? or is it different, and I should only need the forks.

This is what the fork looked like when i pulled it out. I believe this is the 5th gear shift fork. I have not actually used this tranny yet, i bought it off a buddy for 30 bux, so i'm not sure if it would cause a grind or not! Any insight to this? This is the piece that actually broke off...

bump for more info

180- 200 for exospeed, not bad!

http://www.modacar.com/products/Honda/Civic/JFMHA/JIC+Magic+FLT-A1+Suspensi.html

Or maybe a delta regrind?

Would this camshaft be good for mild all motor setup with an 8lb. flywheel. What kind of power gains would i expect. And will this fit a SOHC zc? Not very familiar with cam specs yet. If ne one could help me to understand this better I would appreciate it, if not dont worry, I'll read a book or...

I was wondering what you guys thought of JIC Magic full coilovers. I've heard that they are very good, but still not sure. Either that or I will get Teins, but they are kinda pricey for my budget. Any input, particularly on the JIC's would help my descision!