Search results

for whats it worth, i got a 16gb black zune. NOT HD. tried to sell on ebay to no avail. sorry but all my hardware is ipod so thats what i'm staying with for now even though the ipod is kinda meh. $110 shiped. it's basicly brand new. comes with origional box and evreting as new minus the earbuds.

sorry i should have explaned. the tailights can affect the Cruse control. i found out that the LED's cause a input to float causing the erratic "some times it works and some times it dosent". a lint to my DIY to fix it here

yea my first thought is a wheel bearing. if it's in nutral and u rev the engine can u hear / feel the humming? if so than it's in the engine or mounts. if it's to speed then i'd say wheel bearing or axel.

do u have LED's for tailights? any kind. the bulb or a aftermarket LED tailight.

yea the seafoam could have defently done it.:word: i was going to do it but i wanted to see the results first. not good as it eats seals. how many miles were on your odometer. i also have a 1.7 2002 and drive it pritty hard. i dont wana end up like you :P

no it wont bolt up. not even a dseries will bolt up. the D17 is a bastard child even though it's a D deries it's incompatible with anyother D series engine. D17 is interchangable in it's self however. icould mount up a D17A6 (U.K. spec) tranny to a A2 motor or vice versa but not a D16y8 trany.

why dont u push your head a couple more feet toward the winshild and see if it has the spool valve. f**k what the cover says, if it's got the sololnoid theres no disputing it.

my understanding is true VTEC has 5 lobes per cylander on the cam shaft. VTEC-E has 4. if u look at the D17A2 cam it has 4 so it's VTEC-E.

redline: 6800rpm full speed cut: 112mph.

DTC: 11 Right-front wheel sensor (open/short to body ground/short to power) check the wiring to / from the sensor. for any nick or cuts. or the conection could be loose. also i had a flickering ABS light too. turned out to be excess brake dust on the sensor.

depends on what generation u have. if it's 96 and up u can get a Scangauge. earler years is incompatibe with it.

i know the 4th gens arnt replacele but i beleve the 7th gen is. 13.7 is fine.

P0122 Throttle Position (TP) Sensor Circuit Low Input P1298 Electric Load Detector (ELD) Circuit High Voltage i got them from Here

my edducated guess would be the wire that goes in your comonation switch just wire that to whatever it is when your lows are on. 12 or ground.

i would check your ABS sensors on each wheel make sure ther not dirty etc. and check your brake fluid. could bee they bled the brakes and didnt refill it. only time the E brake light comes on is the E brake handle or low brake fluid.

i get around 32 33 MPG but i'm slightly leadfooted too :lol:

i hate to burs evreyone's bulbble but thats not the PCV. thats the breather hose FOR the PVC system. the PVC VALVE is on the back of the motor best accsessed from under the car. from the side of the intake manifold u'll find this 1/2 inch diamiter pipe. follow this down to the oil fume...

this is mine: HPI baja 5b 1/5 scale w/ upgraded 30.5cc engine :shock::D http://www.davesmotors.com/store/product1106.html

u can use 5mm for the climate control lights. as for the radio never touched that so IDK. the other dash lights by the mirror button use tiny grain-of-wheat bulbs and use a 3mm LED. the AUTO on the window switch is allready an LED so just change it to change the color. all the others are the...

i also have about 80K on my 02 and i hear a single click when i turn the wheel. is that cv joints? it will do it moving or not.