Search results

  1. umair

    Who's here to stay?

    Man i just came on here after years.lol. im shocked at how dead this forum has gotten. It used to be poppin! But then again it seems like Facebook has killed it for most forums. I learned a lot on here!


  2. umair

    seems like this forum died?

    Well those sites dont have knowledgeable people like we have on the forums.
  3. umair

    seems like this forum died?

    i just came back on here after over a year. seems like a lot of people stopped using it. kinda sucks because i used to be on here all the time. lol
  4. umair

    HELP brakes keep sticking!

    yea its going to be. well here is the thing. after driving the car the brakes do lock up after a few min but u can still drive the car. before i changed the master the car wouldn't move at all. so im a little confused. dont i have to adjust the push rod if i changed the master?
  5. umair

    HELP brakes keep sticking!

    i did bend new lines for the master and driver side. the rear lines are old and also the passenger front.
  6. umair

    B and K series questions

    yes u can rev a stock b16 block to 9k prms no problem but the b18c will make more power. i dont think u should rev that high if ur not gonna be making power in high rpms.
  7. umair

    HELP brakes keep sticking!

    well what could have gone wrong exactly?? the bends?
  8. umair

    HELP brakes keep sticking!

    my calipers are good. i changed one of them in the front and that one is also getting locked up and i odnt think all 4 can go bad at the same time,lol. it wont go in because the fluid wont let them release. i did do a brake line tuck so do u think that has something to do with it? if so what...
  9. umair

    tranny/clutch problem

    how does the clutch feel? what is your fluid level at?
  10. umair

    HELP brakes keep sticking!

    after a few min of driving my car my brakes start sticking. before the rod on the brake pedal would just stick to the floor and my brakes would be 100% locked up...the car wouldent move. but after tapping the rod it released. so i changed my master cylinder. the issue did get better because the...


  11. umair

    help me choose which turbo to use!!

    just a quick update....the car is making 366whp and it has been running solid. taking it to the track next week.
  12. umair

    civic starts then dies

    i just installed a b16 into my civic and it started right up. i started it about 5 times but never got a chance to drive it. today i was going to drive it but it started for a second and died. i checked all grounds and they were fine. had a spare relay and still no go. i hear it click too. when...
  13. umair

    help me choose which turbo to use!!

    what about the dyno sheet??
  14. umair

    help me choose which turbo to use!!

    i have ID 1000s. :) i know its not safe but i have a block and im going to see what it can do..
  15. umair

    help me choose which turbo to use!!

    350-400 WHP on b16s has been done time and time again. it doesnt mean im going to run 400whp all the time...when i wanna run 400 whp ill just turn up the boost.
  16. umair

    help me choose which turbo to use!!

    Thanks For the replies..I already have these two turbos at home and I don't have the funds to buy another one at the moment. I know its going to be pushing the motor but with the proper tune and e85 ill be ok.lol. and I don't really care if the block goes bad because I'm. Going to build a motor...
  17. umair

    help me choose which turbo to use!!

    ok so here is the deal..i have 2 turbos at my house. one is a master power .50 trim and here are the specs. T3/T4 Master Power Turbo 300-350hp .63 A/R Stage 2 -Journal Bearing Cartridge -Oil cooled only Compressor -50 Trim Inducer Wheel .42 A/R w/ 3"(75.9mm) inlet and 2"(53.5mm) outlet...
  18. umair

    ***GREAT LAKES General Discussion Thread***

    i never thought this thread would die,lol....but then again im not really on here much anymore.
  19. umair

    boost on b16

    did you do a boost leak test? what turbo are you running?
  20. umair

    any one know about ashmax???

    i just thought id share some info about ashmax here. i think its a pretty good system and if you do it right you can make money off of it. i joined recently. URL removed. if any of you guys do like this pm me and maby you can join our team. let me know what you guys think.
Top