Search results

i would recheck the wiring to the speakers if you dont want to do all that tracing here is an easier way to do take a speaker out and take the radio out but dont unplug hook up the speaker wire purple and purple/black which ever ones you choose lol and connect them to the speaker if no sound...

Could be that some wire is touching in the door and everytime it sparks it cuts in and out the speakers just check your wiring and gounds on radio tape or solder everything real good and you should be fine

ok yeah jump those two wires but no need to remove all that stuff if you have aftermarket radio just get the removal keys and pull aftermarket radio out and located that green plug should be right there and then jump wires

well if you want the best you can go with o2 audio, cadence, and digital design i sell all and cheaper then anyone else but if you are on a budget i say go with pioneer, clarion, audiopipe and make sure you upgrade your headunit or speakers aint going to do nothing for sound qaulity MECP...

i took mines off without even having to take the bumper off there is like 4 screws and you just have to feel for them and unscrew by putting your hand thru the grill of the bumper easy took me 5 minutes

wire colors for ur car 12v--- + white Start-- + black/white Ign--- + black/yellow acc--- + yellow tach-- (ac)blue at 2pin connector near distributor or that little test connector on drivers side with 1 wire in it brake---green/white at brake switch parking lights--- + red/black @...

You need to go to another shop because now that alarms are made for manual cars they have to install it. also it could be that there dumb and dont know how to do it. Common sense if the remote is for manual transmission means that you have to do a certain procedure before you get out of the car...

hmm try disconnecting the back up fuse to the ecm so that the code can be wiped out of the ecu

it goes into protect mode because the sub was asking for more power then that amp could put out thats sony for you always get an amp that pushes more rms then the subs rms

hey i got some integra Ls rims from my boy but he had painted them gold but underneath the gold paint is the actual color of the rims i think he just painted over the stock rim color i want to know what to do to get to the stock color without messing up the rim like what kind of sandpaper to use