Search results

Sup everyone, I'm looking for techinical information on this one, and would like to only hear back from people who have already done a pulley replacement. I have to replace one of my pulley's and am looking at replacing all three pulley's and belts and need some information before I...

it wont matter how much u lube them up, they will still make noise because the lube willl wear off. its not to bad its worth it if you want to corner faster. The entire bushing kits are a good idea but if your not doing this all your self expect to pay a bit in labor. If your looking for a...

depends on the tire. if you changed tire size and/or width you will HAVE TO get an alignment. Firestone is a great place to go for these type of things, they always (in my experieneces) will throw the alignment for free. If you live towards the south and you have an ALL-PRO/Tire Connection Tell...

well im sure there is hundred something bushigns throughout the car. but most bushing kits come with a few dozen. Basiclly when u turn the weight of the car shifting is pushed onto the bushings. With rubber bushings they flex causing uneven turning. Poly ones will flex less causing a more smooth...

u looking for a poly kit to replace all ur bushings or just a camber kit w/ poly bushings?

yeah, basiclly u wont get rid of the noise. but its not real loud, only when ur driving with no music.

be careful w/ the new bushings. they are extremely loud after a few miles. They are great improvment though, u'll corner faster then u can imagine, but they squek extremely loud =/

This is just an opinion and could be false. From what the website says and from the pictures of the install it looks like it simply combines the front bumper frame to the body frame. Basiclly its like a strut bar, but instead of connectiong and firming one side axis with another its...

Here's one more (and my personal fav.) when i get back from work ill try and find some clean civics to post. till then have fun yall.

I personally run the stillen crossed drilled rotors and pads. They work great and got a show quality look thats to drool over. They will not stay gold thats just a coating thats on them, i can bring up a picture if you like. I replaced the rotors and pads almost a year ago and still havent had a...

it all depends what company is used for the satalite. If they are not a usa company too then the navi system will not work. but i think you guys are missing the potential of this. its a console that can easily fit into civics that allow a screen... can we say easy dvd install? I would hook up...

Hey guys, I know its been a while since I last posted (been working my a$$ off so I can begin with some new mods + been adding a good amount of Green to our new project car (mmm... VW's :thumbs up)) Anyways. I'm looking for feedback on High Flow Cats for the d16y8. I currently just installed...

didnt see the last page of replys, dont get an ls motor. Especially dont do a vtec/ls unless you enjoy cone shaped pistons because thats all your going to get. I have a write up somewhere on this topic but the summary of it is that because the ls/vtec rod ratio is so high when the piston is...

4,000 for a b18c? you best chance is a 4,200 for a b18c1 from hmotors.com then 750 + for install. so your more or less around 5k, dont listen to anyone telling you less, they are etiher lying or gettin a very abused engine. You also might consider saving up for some internal work b4 the engine...

Have a shop do it if you dont know. Tapping an oil line or the oem oil pressure gauge it self is dangerous, if you do it right your engine can and will seize, you also need a percise drill. If you have not done it before have someone else do it, its not worth taking the chance.

we need an admin to edit the post so only the first few posts are left. this is a good write up (no matter who wrote it up) and will help the general public alot.

only if you buy an aftermarket intake manifold, you gotta make sure you get one for an automatic (the iac valve is in different locations). Also you might want to consider a different car, because you will get a bad rep for having an automatic... I personally don't care, gotta do what you gotta do.

why not? it's the same manifold, and i believe its the same exact product number (sometimes they sell b-series more expensive even though its the same item, just becaue there is more of a demand).

it can be put onto any d-series and i believe the b16's (its going on my d16y8)

Powder coat, Will never burn off, lose color, and is a complete glossy finish that will last forever. Ran me about 60 dollars to get done because of the color, if you choose black or a color that they will already be painting something it will be cheaper. Just go to yahoo.com and type in your...