Search results

Update time I might start a new thread... after serious consideration I wont be putting this motor into the ek. I'm gonna try to find a CRX or a EF Hatch. anyway on to the pictures! New ARP Head Studs - New Toga HV oil pump New D16Y8 Intake manifold, Fuel Rail, and Head. Removing the...

New D16Z6! Eagle H-beams on standard 75mm Vitara pistons Someone had a rod bearing fail and decided to continue to drive on it! Precision 680cc Injectors.

Cut the rust out of the quarter panel... was going to do it myself. But, In an effort to keep bondo out of the quarter panel It's going to honda! I was quoted $400 for new metal welded in and it put primer. Dropped the front on coilover sleeve's - new Hankook Ventus V4 205/50R16 Bought...

Update! The civic is officially a 5 Speed!

been awhile since my last update... picture's speak louder than words! Traded the fat five's for some Drag Dr-31's. They need tire's but are useable for the time being. Also, I now have everything for the five speed swap. I'm starting on that next friday!

Update Found a nice center console today at the junkyard... I'll get some picture's up soon! Kinda started on the 5 speed conversion today, got the gas and brake pedal's swapped out. Still need to find Clutch master cylinder, starter, & shift linkage.

Jack the front of the car off the ground. Grab the wheel and try to move the tire from left to right. If it has play you have a bad inner or outter tie rod end. Top and bottom play is ball joints.

All right, update time! New mirror is installed. I couldn't find a color matching mirror at the junk yard... so, I went with the closest matching paint i could find @ the parts store. New working sunroof installed. as well a new headliner board in perfect shape. removed the wing from the...

Thanks Logan! Update. was in an accident Tuesday morning on my way to work. Lady came over the center line taking off the mirror and denting the door (where the mirror hit) Just got a quote from a honda dealer. $525.00 in damage. Looking for a complete Cypress green pearl driver's door!

SI tail lights installed! My plan's for this weekend fell through... On my way to work friday car started shaking like it had lost a wheel weight. Instead it turned out to be driver's inner tierod end. Friday night it was replaced. took it in for an alignment saturday morning. Also, changed the...

***Update*** The new center cap's came in yesterday. However, stupid me ordered 2.75" cap instead of the 2.25" caps. So, I'll be returning them next week. Today, got new lugnut's! Finished up the usb power connector and radio aux input. Hacked the s**t out of the usb connector. Have to pick...

bought them last night!

Got the wheel's on Saturday!

Still collecting part's! so busy with work, if I had the part's it still wouldn't get done! Most likely a project this july or august.

Thanks guys! Just ordered new tire's, bought 4 Kumho Ecsta AST 205/50R15's!

hard at work on the wheel's! Got most of the curb rash knocked off, all the clear stripped, and two of the wheel's at 150grit. still a few spot's on both that need touched up one more than the other... then hit all four with 320 grit, 400 grit, & wheel polish! After that painting begin's! back...

Test fit the wheel's today! Don't mind the back... but something gotta give up front sit's way to high. Should I go with a bigger tire (195/55R15 in the pic, maybe buy 185/65R15 instead) or lower the front? Need any and all idea's to make it look right! If I lower only going 1-"1.5"! Also...

You solder wire's onto the head of the cassette player, should need two wire's. I've not finished it yet so couldn't tell you for sure which one's. I do know there is 5 wire's coming from the head of my cassette player. You're best bet would be to solder 5 wire's to the head and use process of...

new door panel's.

Skulleds I'll sell you the wing. Do you have a green trunk with no holes? I trade you straight up trunk for trunk ( with no hole's).