Search results

  1. rover4x4

    problems after y8 intake manifold swap on y7

    i get a iat sensor cel after my intake swap car run wells i lost a couple mpg with the y8 intake. i used stock intake and airbox from an ex, i replaced the sensor with a new one and i continue to get a cel. i can drive the car a couple hundred miles before the cel


  2. rover4x4

    How many miles on your 6th gen Civic?

    146k on my EK w/ Y7, has a new clutch and ISB in the transmission. Ive replaced the timing belt and had valves adjusted otherwise nothing other than regular maintenance. GF has 198k on her 96 EX its had a transmission (auto) and a vtec solenoid as well as hundreds in repairs, she has been taken...
  3. rover4x4

    EJ7: Largest fitting spare?

    I have a fullsize spare in my hatchback, 185/65/14 it was easily secured with the stock bolt/clamp. Its nice having a fullsize spare esp when you get a flat hours from home.
  4. rover4x4

    1996 honda power window wiring

    I have been dealing with a stuck rear window, all the other windows work (slowly). My ps rear window (SEDAN) is currently stuck down. I have swapped door switches and the switch is fine. I can hear the window motor when I try to lower the window but not when I try to raise the window. Should...
  5. rover4x4

    96 ex rear door panel removal

    There are a number of clips holding the panel to the door, you will inevitably break a few when you pull the panel off. Be sure you have also unplugged the power window switch if applicable.
  6. rover4x4

    Skunk2 short-throw shifter reviews?

    Will a Skunk2 dual bend work on a EK DX? I see no reason why it wouldnt. Thanks.
  7. rover4x4

    need help on front lip

    Does a front lip offer any benefit other than aesthetics?
  8. rover4x4

    Post Your 6th Gen Hatch! Comments now allowed!

    97 EK with 83k I bought it with 63k a little over a year ago. Stock other than: HX wheels SI rear disc/MC/BB SS lines http://i1100.photobucket.com/albums/g415/pperkinson/lloyd.jpg
  9. rover4x4

    ECU reset needed after wheel change?

    Is it possible to recalibrate the speedometer?
  10. rover4x4

    Question on tire size

    I bought some SI wheels that had 195/50s I really dont like them at all, they handle well but my fuel mileage has decreased significantly. they look silly unless you have a drop, ask me how I know.


  11. rover4x4

    cold air vs ram air?

    how many people have hydro locked their engines with the bypass installed on a CAI?
  12. rover4x4

    Rear Disc Conversion Question

    not a bad project, the worse part was the heat shield, parking brake gromets, proportioning valve and the brake booster. I need to bleed the brakes seems like a pretty worthwhile upgrade, you can only go as fast as you stop/
  13. rover4x4

    Rear Disc Conversion Question

    Thanks, I will likely just do the spindle swap, my car just turned 82k so honestly nothing should be worn out
  14. rover4x4

    Passwordjdm fenders...yay or nay?

    Whats the difference with the "JDM" fenders other than the sidemarkers?
  15. rover4x4

    Enkei RPF1

    I ended up with some SI wheels and 195/50's they look sharp but I lust for the RPF1's. I have found that my speedo is way off with the 195/50's and my engine certainly works harder on the interstate, lost about 10mpg I guess thats the price we pay...
  16. rover4x4

    Rear Disc Conversion Question

    can anyone verify not needing the LCA, only the hubs and spindles? Seems a lot easier, just removing 5 bolts versus the LCA, is there any advantage to the SI LCA?
  17. rover4x4

    Rear Disc Conversion Question

    Im pretty positive they arent. Will all the hard lines etc work when swapping to the 7/8" MC from the 15/16" MC?
  18. rover4x4

    Rear Disc Conversion Question

    IN going from DX to the 99 SI prop valve, MC and booster will the hardlines from the DX work or will I have to bend new lines?
  19. rover4x4

    What oil filter are you guys using?

    NAPA Gold or a Mobil if I cant make it to NAPA
  20. rover4x4

    Help with d16y7 and d6y8

    Is there a write up for the Y7 intake to Y8 auto manifold swap?
Top