Search results

  1. mc360

    coilover rebuild?

    ok so to start out i own a 99 civic ex sedan, the coilovers are function and form type 2 with 60k+ miles, spring rates are 12kg front and 8kg rear. i emailed function and form about figuring out if my coilovers are blown out and they said that 1. an obvious oil leak from the strut should appear...


  2. mc360

    bad oil leak after head gasket

    first of the car is a 99 honda civic ex sedan d16y8, the car is boosted and i started overheating last week (after about 3 weeks of being boosted). i found out i was getting exhaust into my coolant, so i pulled the head the other day and replaced the gasket with a brand new oem y8 gasket and...
  3. mc360

    bearing failure?

    ok so i just started hearing this noise in my car the last week, it kinda sounds like sand or something in the motor (hard to describe). i guess the noise depends on the load of the motor, driving on a flat road it does it at about 4000 rpm but going up a hill bogging out a little it does it...
  4. mc360

    future boosted 99ex sedan with A/C

    hey guys whats up, i used to have a boosted hx coupe until a guy at work rear ended my car. i bought a 99 ex sedan about 2 weeks ago completely stock for 4000, yesterday i removed all my stock stuff and swapped it for my function and form type 2 and camber kits. Exterior -drag dr-41 +40mm -...
  5. mc360

    arias high compression d16 piston and rods

    hey i have for sell a brand new set of arias high compression pistons for a d16, these are 11.6:1cr with a d16y7 head and 11.9:1 with a d16y8 head. these pistons are 565$ alone and the rods are bisimoto forged rods which cost $330 i think, everything is brand new and has not been installed but i...
  6. mc360

    driver window motor not working

    1996 civic hx ok so my driver window quit working about 4 months ago and i have been ok with it since its winter but now i need it fixed. i replaced the motor about 8 months ago and every now and then my window would work off and on but now just doesnt work at all. i have checked fuse...
  7. mc360

    anyone diy a ctr gauge bezel?

    hey guys just curious if anyone has ever tryed to make there own ctr gauge bezel using there stock gauge bezel and some 3m cf vinyl? i just thought about it today and im planning on trying it here soon since i dont feel like paying password jdm 65$ for a bezel. when i make it if it turns out...
  8. mc360

    power window broke

    hey guys i figured i would ask why my window wont go down all of a sudden because all the other threads i found on google didnt have an answer.my window worked fine this saturday but it was a little slow since i bought the car in 2010 but all of a sudden on sunday it wouldnt roll down? i can...
  9. mc360

    hid foglights

    Hey guys I have a 96 ek coupe and one of my bulbs in my foglights has gone out and I have been wanting to buy some hids for them. I have cheap yellow eBay fogs( I know I want to buy some password fogs) anyways there not yellow enough for me anymore, the glass has faded a little so I want 3k...
  10. mc360

    96-98 optional lip replica?

    Ok guys I'm really wanting this lip for my car, its the best looking lip for my year and I'm curious if there's any good manufactures that make a replica of it that will fit right. I know its eBay and I shouldn't buy it but does anyone have any experience with this seller and this lip...


  11. mc360

    city lights question

    Hi I just bought a set of Canadian sir headlights for my 96 hx and I'm curious how they work? Do they use a switch or what. I have searched and people say to wire them to the parking lights but are they supposed to stay on even when your headlights are on
  12. mc360

    04 ex cluster for ek

    Hello everyone I'm trying to sell my 04 ex cluster. I don't want it anymore because I couldn't get the heat gauge to work and I can't stand looking at a Cel that isn't real.it works fine and has 92xxx miles one it. Does require some modification to install. I trimmed the edges of it so it would...
  13. mc360

    96 hx vtec problem

    Hello I just recently started have this problem with my y5, not sure if its something with vtec but when I'm coming out of a corner in 1st or 2nd gear and get on it it feels completely gutless then once it straightens out vtec kicks like my friends b16. It doesn't do this if I get on it on a...
  14. mc360

    hx exhaust conversion

    Hi I have searched everything I need to know and found all the answers but I have one more, if I convert to an ex exhaust will my car throw a Cel from moving my secondary o2 to below the car with the conversion? Also will I pass visual inspection in ca with my cat and o2 relocated to under the car?
  15. mc360

    96 hx mini me head swap

    hello everybody i have recently been thinking about doing a mini me on my hx with a d16y8 head and i have done the research and figured out i need the head,intake manifold, and ecu. is this all i need and what timing belt would i get for this swap.i know i can get a b series engine rather than...
  16. mc360

    window regulator

    when i bought my car it had a broken window regulator i guess. all i know is the gears on the motor were worn off so i bough an ebay one for 35$ and it lasted me a year and has now gone out so i need someone to clarify the exact part i need.if the gears are worn on the regulator would i just...
  17. mc360

    WTB: 96-98 civic front bumper reinforcement

    hello i would like to buy a 96-98 civic front bumper reinforcement. if anyone has one can you give me a price shipped to 95956.
  18. mc360

    dome light& headlight ON reminder problem

    recently my headlights on reminder stopped working and my dome light only comes on with my passenger door or when i turn it on but it used to come on with my driver door so what might this be? i was thinking my driver side door switch maybe?
  19. mc360

    foglight switches keep melting

    well my relay for my ebay fogs went out so i bought a 12v 40a afrom autozone which is the same size relay as my old one. anyways after i installed it i have had two switches melt so is this from to big of a relay. also how can i use a toggle switch instead of the oem style
  20. mc360

    function&form 2 on the way

    hello i just bought my function and form type 2 for my 96 hx and i can say i am f**king stoked to get them. i will use this thread as my questions thread and maybe write a small review once i have them installed and adjusted to how i like them. i also bought them from one of the site sponsors...
Top