brake bleeding question

[BseriesEG]

im in the process of fully rebuilding my hatch. i just recentlyfinished up my brake setup. put integra 10.2 front brakes and rear disc, new pads rotors, integra master cylinder and brake booster,40/40 valve and new braided brake lines. now i wanted 2 kno can i bleed the system now? or do i have to have the one vaccum line hooked up to the manifold? its the big vaccum line that runs off the booster too the top of the manifold.

 

[knightxrider1]

i think you can only bleed it when its vac. tight. when you step on the pedal. it holds its stiffness. so w out all the vacumm lines intact, how you can use the brakes? i dont know wat line your talking about. but i tink you need to wait until all the lines are connected. then bleed them.

 

[CARMandP]

You can bleed the brakes without vacuum. You want to bleed the brakes with the engine not running. Its much easier.