Harv's slow eh9 build

[Harv_D_Johnson]

Well I've been around awhile and figured its time to start on of these.

Purchased the car from a friend back in august. Did a tune up and fluid change to get it running good.

How it sat when I bought it.

Still looks the same as it did then.

Then over the weekend me and a few friends stripped a 94 integra. I ended up getting the suspension, front seats and steering wheel.

Suspension consists of skunk2 front and rear camber kits, nex coilovers, integra front control arms, brakes and front sway bar.

Front seats

Steering wheel to replace the autozone one currently in the car

That's about it for now. Suspension will be going in a week or two from now.

 

[Jersey_Devil]

Nice! Good luck with ur build, which route di u plan on taking for ur build? Good find on the acura parts too!

sent from my obama monitoring device

 

[Harv_D_Johnson]

Mainly just a fun dd for now. The teg parts were from a friend paid next to nothing for it just for helping.

This is said autozone wheel

 

[Jersey_Devil]

Mainly just a fun dd for now. The teg parts were from a friend paid next to nothing for it just for helping.

This is said autozone wheel

Gotta love cheap parts! I agree, the auto zone wheel needs to go! Lol

sent from my obama monitoring device

 

[Harv_D_Johnson]

Probably work on that tonight or tomorrow

 

[Harv_D_Johnson]

We'll this build has taken a turn for the worst. Lost a wheel on the way to drill this morning

 

[GooseS2000]

ouch man, hope everything is alright with you. and the how bads the car?

 

[xxBLOOD88SHOTxx]

What are the odds of two people from Lehigh Valley on CC.


Sucks about the wheel, how did it happen?

 

[Harv_D_Johnson]

ouch man, hope everything is alright with you. and the how bads the car?

No bad need an new windshield, new wheel studs( have those ), new fender and new rotor( also have ).

What are the odds of two people from Lehigh Valley on CC.





Sucks about the wheel, how did it happen?

Was driving the car started to shake as I was slowing down to pull over the wheel just let loose

 

[Harv_D_Johnson]

Well between eating and sleeping i got some of the teg suspension in

What happened???

End result

Sent from my iPhone using Tapatalk

 

[Harv_D_Johnson]

Driver side is done

Just need to adjust toe and camber and the front is done. Then on to the back


Sent from my iPhone using Tapatalk

 

[Harv_D_Johnson]

Toe need a bit more adjustment. Other then that the front is done.

What all my friends have called the "euro trash fender"

Also installed the integra wheel.

On to the rear suspension this weekend.


Sent from my iPhone using Tapatalk

 

[yevangelis]

so what did happen?

fender looks beast

 

[Harv_D_Johnson]

Changed i wheel while i was tired. Forgot to tighten the lugs. Lost the wheel the next morning


Sent from my iPhone using Tapatalk

 

[Harv_D_Johnson]

Got the rear suspension done on friday.

I'll have to get a pic of it done when i get home


Random engine pic

Sent from my iPhone using Tapatalk

 

[mymmeryloss]

Not too shabby

 

[Harv_D_Johnson]

Thanks. Just wish i could find a used fender.


Sent from my iPhone using Tapatalk

 

[XpL0d3r]

Changed i wheel while i was tired. Forgot to tighten the lugs. Lost the wheel the next morning

YESSS I'M NOT ALONE!!! [MENTION=58603]R3dline[/MENTION]

I did this once. Actually was setting timing and forgot to tighten the lugs down. Was merging onto the highway when the tire popped off at 30. It's no fun. Watching your tire skip across 4 lanes of traffic and fly into a swamp is pretty entertaining though.

 

[Harv_D_Johnson]

Well finally found a used fender

Old fender

New fender

Even had the trim piece

New fender installed

Sent from my iPhone using Tapatalk

 

[Harv_D_Johnson]

Picture i took the other day of my car and a friends 2010 si

Sent from my iPhone using Tapatalk