mini me swap problems

[LazyLlama]

i know its probably out there somewhere but i need answers asap
i did the mini me swap into my 98 LX manual. i used a 97 head off an acura el and have tried a p2p-c33 and p2p-c34 ecu i used this build as a guide
http://www.jdmuniverse.com/forums/how-tos-tutorials/32971-d16-mini-me-swap-write-up.html

ive got everything hooked up and my car is idling at 1500 rpm but as soon as i let out the clutch a little while in gear it stalls out on me. in neutral it runs and revs up fine. im totally lost right now.

 

[sikswic]

press the gas pedal til you hit the rev limiter and drop the clutch. see if that works

 

[Wreckless Hype]

press the gas pedal til you hit the rev limiter and drop the clutch. see if that works

How is that a good idea?

OP, is your car idling at 1500rpm when it's at operating temp? Because that's high, should be half of that. Any CEL? Maybe the TPS is out of spec. Have you done basic tune up / maintenance? Checked for vacuum leaks?