Removing dent from hood?

[Blazing angel]

Would it be possible to remove this dent with a suction cup/clamp or compressed air + air dryer?

Someone tried to vault over the car, and dented the hood I've kept it safe for a long time, took a few seconds to ruin it all.

I'll try out a toiled plunger and report back later.

 

[gugiey]

I'f it is on that pressure crease then you can get it out .
but I'f it's on that crease where the hood slants a bit then it will need body work .

 

[Blazing angel]

Here is another angle (sorry about low light, will post more pictures later on)

Hopefully it'll come out

 

[DMaldonado93]

try the hairdryer and canned air. Ive seen it work on small dents

 

[civicexkid]

open th hood from the inside and hit it with your hand and see if it pops out mite take a few hits

 

[FreeOfThoughts]

The compressed air may work. If you come to blows don't smack it with a small object (the head of a hammer) try to find a piece of wood or something else large enough and shaped to the contour of the hood but not so hard that it will leave an imprint. You can get it back close to normal but in your eyes it will probably never look 100% unless you have it worked on by a pro.

 

[DeathLens]

dry ice might work. i've tried those canned air and it doesn't work.

have you tried pushing it out?

 

[THEDARKONE]

yea push it out but heat it up so paint wont crack(: