Ksport Kontrol Pro Damper System Coilovers

Ksport Performance Parts
Ksport Kontrol Pro Damper System Coilovers
Product my vary from image(s).


Manufacturer: Ksport | Category: Coilovers

Ksport Kontrol Pro Fully Adjustable Coilover Kits provide the ultimate in suspension technology for your street or track car. 36 levels of damping adjustment allow you to fine tune the ride to your handling and comfort needs. The damping adjusts compression and rebound simultaneously for ease of adjustment. Pillow ball top mounts in the front and rear on some applications allow you to maintain vehicle manufacturer suspension geometry design. The pillow ball top mounts also allow you a more direct feel for solid driver response. Where available, camber can be adjusted via the Pillow-ball Top Mounts, which means no additional “Camber Kits” are needed.

Most applications utilize an adjustable lower mount, which means you adjust height without losing suspension travel like some other coilover designs do. With the mounts and most pieces of the coilover being designed for 6061 billet aluminum the kit is lightweight, durable, and rust resistant. The steel shock body is electroplated with zinc to resist rust and the elements. The valving of each set is matched to the springs installed for unmatched ride quality and reliability.

The Ksport system uses a Monotube design in which the oil and gas are separated within the cylinder. When compared to twin tube designs the Monotube dissipates heat better, allows finer damping adjustments, and requires more expensive design process. Aeration and cavitation are a lot less common in a Monotube design, which results in a better ride.

The Ksport Kontrol Pro Coilover kit has been designed with professional road racing in mind offering extremely high value and performance.

Spring rates are always shown in kg/mm / lbs./in
ATM = Aluminum Top Mount
P/U = Pillowball Upper Mount
OEM = You must resue your OEM top mount

Features:

    • 36 way adjustable damping
    • Collars and upper mounts made from 6061 aluminum with T6 for increased hardness
    • Adjustable spring perch for height adjustment
    • Adjustable lower mount allowing maximum suspension travel
    • Camber adjustment on vehicles with McPherson type suspension
    • Pillowball top mount for increased steering feel
    • Monotube high pressue design reduces oil leakage
    • Electroplated body for added protection from corrosion and rust
    • Dust boot to protect damper seal
    • 18 month limited warranty
Visit the Ksport website or contact us for more information on this product.


Acura Ksport Kontrol Pro Damper System Coilovers

Acura CL

CAC090-KP 1997-1999 Acura CL YA1
Spring Rates: Front 14/784 KG/LBS - Rear 7.2/403 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER
CAC070-KP 2001-2003 Acura CL YA4
Spring Rates: Front 14/784 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER

Acura ILX

CAC130-KP 2013-2015 Acura ILX YA4
Spring Rates: Front 7.5/420 KG/LBS - Rear 7/392 KG/LBS | Camber Plates: Front YES - Rear NO
DROP SHIPS FROM MANUFACTURER
CHD361-KP 2016-2017 Acura ILX YA4
Spring Rates: Front 7.5/420 KG/LBS - Rear 7/392 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Acura Integra

CAC010-KP 1990-1993 Acura Integra DA6
Spring Rates: Front 9.8/549 KG/LBS - Rear 5/279 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CAC020-KP 1994-2001 Acura Integra Excluding Type R DC2
Spring Rates: Front 9.8/549 KG/LBS - Rear 5/279 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CAC021-KP 1997-2001 Acura Integra DC2 (Type R (rear eyelet))
Spring Rates: Front 9.8/549 KG/LBS - Rear 5/279 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Acura Legend

CAC080-KP 1991-1995 Acura Legend KA7
Spring Rates: Front 14/784 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Acura NSX

CAC040-KP 1991-2005 Acura NSX NA1
Spring Rates: Front 9.8/549 KG/LBS - Rear 12/672 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Acura RSX

CAC030-KP 2002-2006 Acura RSX DC5
Spring Rates: Front 8.7/487 KG/LBS - Rear 9.5/532 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Acura TL

CAC060-KP 1999-2003 Acura TL UA5
Spring Rates: Front 14/784 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER
CAC100-KP 2004-2008 Acura TL UA5
Spring Rates: Front 14/784 KG/LBS - Rear 7.2/403 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CAC110-KP 2009-2014 Acura TL UA5 (incl. AWD)
Spring Rates: Front 14/784 KG/LBS - Rear 7.2/403 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER

Acura TLX

CAC140-KP 2015-2017 Acura TLX UA5 (incl. AWD)
Spring Rates: Front 9/504 KG/LBS - Rear 7.2/403 KG/LBS | Camber Plates: Front YES - Rear NO
DROP SHIPS FROM MANUFACTURER

Acura TSX

CAC050-KP 2004-2008 Acura TSX CL9
Spring Rates: Front 14/784 KG/LBS - Rear 7.2/403 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER
CAC120-KP 2009-2013 Acura TSX CL9
Spring Rates: Front 18.6/1042 KG/LBS - Rear 7.2/403 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER

Honda Ksport Kontrol Pro Damper System Coilovers

Honda Accord

CHD240-KP 1985-1989 Honda Accord CA5
Spring Rates: Front 12/672 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD070-KP 1990-1993 Honda Accord CA5
Spring Rates: Front 14/784 KG/LBS - Rear 7.2/403 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD070-KP 1994-1997 Honda Accord CA5
Spring Rates: Front 14/784 KG/LBS - Rear 7.2/403 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD080-KP 1998-2002 Honda Accord CA5
Spring Rates: Front 14/784 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD100-KP 2003-2007 Honda Accord CA5
Spring Rates: Front 14/784 KG/LBS - Rear 7.2/403 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD230-KP 2008-2012 Honda Accord CA5 (4cyl.)
Spring Rates: Front 14/784 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD231-KP 2008-2012 Honda Accord CA5 (6cyl.)
Spring Rates: Front 18.6/1042 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD380-KP 2010-2015 Honda Accord Crosstour CA5 (FWD/AWD)
Spring Rates: Front 18.6/1042 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER
CHD400-KP 2013-2017 Honda Accord CA5
Spring Rates: Front 9/504 KG/LBS - Rear 7.2/403 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Honda Civic

CHD011-KP 1988-1988 Honda Civic EF (Eyelet rear shock)
Spring Rates: Front 9.8/549 KG/LBS - Rear 5/280 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER
CHD010-KP 1989-1991 Honda Civic EF
Spring Rates: Front 9.8/549 KG/LBS - Rear 5/280 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD020-KP 1992-1995 Honda Civic EG
Spring Rates: Front 9.8/549 KG/LBS - Rear 5/280 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD030-KP 1996-2000 Honda Civic EK
Spring Rates: Front 9.8/549 KG/LBS - Rear 5/280 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD040-KP 2001-2005 Honda Civic ES1/EM2
Spring Rates: Front 7/392 KG/LBS - Rear 8/448 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD050-KP 2002-2005 Honda Civic EP3 (Si Hatchback)
Spring Rates: Front 8.7/487 KG/LBS - Rear 8/448 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD190-KP 2006-2011 Honda Civic FG1 (incl Si)
Spring Rates: Front 7.5/420 KG/LBS - Rear 7/392 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD360-KP 2012-2013 Honda Civic FG1 (incl Si)
Spring Rates: Front 7.5/420 KG/LBS - Rear 7/392 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD360-KP 2014-2015 Honda Civic FG1 (excl. Si)
Spring Rates: Front 7.5/420 KG/LBS - Rear 7/392 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD361-KP 2014-2015 Honda Civic Si FG1 (Si Only)
Spring Rates: Front 7.5/420 KG/LBS - Rear 7/392 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD420-KP 2016-2017 Honda Civic FG1 (Sedan/Coupe)
Spring Rates: Front 7.5/420 KG/LBS - Rear 7/392 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD430-KP 2017-2017 Honda Civic FG1 (Hatchback only)
Spring Rates: Front 7.5/420 KG/LBS - Rear 7/392 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Honda CR-V

CHD110-KP 1995-2001 Honda CR-V RD2
Spring Rates: Front 12/672 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD120-KP 2002-2006 Honda CR-V RD5
Spring Rates: Front 9.8/549 KG/LBS - Rear 12/672 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD121-KP 2007-2011 Honda CR-V RE1/RE3
Spring Rates: Front 10/560 KG/LBS - Rear 12/672 KG/LBS | Camber Plates: Front YES - Rear NO
DROP SHIPS FROM MANUFACTURER
CHD390-KP 2012-2016 Honda CR-V RE1/RE3
Spring Rates: Front 10/560 KG/LBS - Rear 12.2/683 KG/LBS | Camber Plates: Front YES - Rear NO
DROP SHIPS FROM MANUFACTURER

Honda CR-Z

CHD310-KP 2010-2016 Honda CR-Z ZF1
Spring Rates: Front 7/392 KG/LBS - Rear 4/224 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Honda CRX

CHD011-KP 1988-1988 Honda CRX EF (Eyelet rear shock)
Spring Rates: Front 9.8/549 KG/LBS - Rear 5/280 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER
CHD010-KP 1989-1991 Honda CRX EF
Spring Rates: Front 9.8/549 KG/LBS - Rear 5/280 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Honda Del Sol

CHD020-KP 1993-1997 Honda Del Sol EF
Spring Rates: Front 9.8/549 KG/LBS - Rear 5/280 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Honda Element

CHD260-KP 2003-2011 Honda Element EF
Spring Rates: Front 9.8/549 KG/LBS - Rear 15/840 KG/LBS | Camber Plates: Front YES - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Honda Fit

CHD160-KP 2006-2008 Honda Fit GD1
Spring Rates: Front 6.7/375 KG/LBS - Rear 5.2/291 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD270-KP 2009-2014 Honda Fit GE
Spring Rates: Front 6.7/375 KG/LBS - Rear 3.8/213 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD410-KP 2015-2016 Honda Fit GE
Spring Rates: Front 6.7/375 KG/LBS - Rear 4/224 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER

Honda HR-V

CHD440-KP 2016-2017 Honda HR-V GE (FWD)
Spring Rates: Front 6.7/375 KG/LBS - Rear 7/392 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Honda Insight

CHD320-KP 2010-2014 Honda Insight ZE2
Spring Rates: Front 6.7/375 KG/LBS - Rear 5.2/291 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER

Honda Odyssey

CHD330-KP 1995-1999 Honda Odyssey RA1
Spring Rates: Front 12/672 KG/LBS - Rear 15.5/868 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER

Honda Prelude

CHD210-KP 1988-1991 Honda Prelude BA4
Spring Rates: Front 12/672 KG/LBS - Rear 6.2/347 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD170-KP 1992-1996 Honda Prelude BB1
Spring Rates: Front 14/784 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER
CHD180-KP 1997-2001 Honda Prelude BB6
Spring Rates: Front 14/784 KG/LBS - Rear 6.7/375 KG/LBS | Camber Plates: Front NO - Rear NO
IN-STOCK - DROP SHIPS FROM MANUFACTURER

Honda S2000

CHD140-KP 1999-2009 Honda S2000 AP1/2
Spring Rates: Front 14/784 KG/LBS - Rear 9.8/549 KG/LBS | Camber Plates: Front NO - Rear NO
DROP SHIPS FROM MANUFACTURER