Can I Use Stock 91 EF Axles For B18a1 Swap

Thewhitecivic

New Member
Just Wondering because im a little confused
Can i use my [Stock Ef axles] to do my b18a1 swap?
or do i use the 90-93 b18a1 axles that came with the tranny?
if so what do i need to do for the 90-93 axles to work on my Ef B18a1 Swap?
Do I need to even do anything or do they just bolt right up?

please reply need help
 

2slo4u

wait4me
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
you'd need the axles that go with the motor
 


Kensai

♪♫♪♫♪~
Registered VIP
Registered OG
5+ Year Member
If I remember correctly, the hubs on EF steering knuckes are a bit bigger than most of the b-series knuckes.

Someone verify this please.
 

Blood_Shot

Banned
Registered VIP
use the integra axles they go right in
 


jlicrx

New Member
Registered VIP
5+ Year Member
use the integra axles they go right in
not if his Civic is the STD model (originally with D15B1 and 4-speed) in which case he would need to swap knuckles/hubs - the STD model used smaller hubs and smaller axles - in any case you need to remove the dust rings from the inside of the hubs in order to use the Integra axles - otherwise, the axles will bind up on the back of the hub
 

Blood_Shot

Banned
Registered VIP
not if his Civic is the STD model (originally with D15B1 and 4-speed) in which case he would need to swap knuckles/hubs - the STD model used smaller hubs and smaller axles - in any case you need to remove the dust rings from the inside of the hubs in order to use the Integra axles - otherwise, the axles will bind up on the back of the hub
I double checked and this^ is correct
 

Thewhitecivic

New Member
so i have to take off the dust rings for them to work?
and yes i do have the little piece or crap standard 4 speed lol
so i have to take off the dust rings off the knuckles also?
 


Top