Search results

Small update My Password JDM Kevlar intake came in today for those who didn't see the other thread, looks and sounds GREAT. Very satisfied.

Alright so basically here's what I did. Just eliminated this metal piece and the got one of the mini air filters for the valve cover, the coolant line that ran through this metal piece had a long enough hose to just bypass the metal piece. Then the vacuum line goes straight into the intake...

So plug it or no?

This is the hose that the "vaccum line" is coming out of in in the picture above..

Lol this check engine light is pissing me off. I plugged the sensor in. Does it take time to go off or something?

How important is the hose that goes from the valve cover to the intake?

When its plugged it idles fine, but Im not sure why i have a check engine light

But there is a check engine light.

Yes but there was three things plugged into the stock intake tube, the power chamber has two holes

It sucks my finger so I was assuming it was the vaccum line. There is the sensor and the then hose that goes from the valve cover and the the "vaccum line" or what ever it is.

2000 Civic EX d16y8 There are two holes drilled in the power chamber but where do I put the vaccum line? Thanks

I got my Koni/Ground Control set up WITH Ground Control's extended top hats for right at about 900. If you save a little more you will not be disappointed

I ordered my lower control arms there. Shipped fast, no problems.

Anyone go to the Mt. Juliet 5 guys meet on Sundays?

I mean they fixed the front a lot. My toe was .18 on the left and -.82 on the right. And in the rear it was .25 on the left and .13 on the right. Im not sure why the right got worse. AND I also have a front camber kit which they didn't even touch. Haha. Glad I got that for free.

Shouldn't it have been fixed when I got my alignment... THIS MORNING! Good thing I got the life time deal. I was curious why the rear was so much higher than the front Thanks for the input

2000 civic ex LEFT FRONT RIGHT -2.2 Camber -2.0 -1.4 Caster -2.1 .01 Toe .01 LEFT REAR RIGHT -2.3 Camber -2.5 .13 Toe .14 Decent? Tire wear thoughts? drifts to the right alittle... didnt do that before...

Not hard at all man, Just look up DIYs there is a lot for them. I got the shocks from jayjay (Tuner Sports) and the springs from Ground Control's actual site because I wanted a little stiffer spring. Thanks=) Thanks. And yeah I havent bottomed out either.

They're awesome. Get them, you won't be disappointed.

Looks good man