Search results

  1. civteck

    New honda owner.

    Cant really tell as that is not the motor for your car but... the rear stays capped where the front side usually runs fron the pcv on the valve cover. Better to keep it the way you have it, ill look if i can find a pic how mine is. Sent from my boujea ass phone


  2. civteck

    Cold Air Intake?

    Id price out a replacement make them pay for it then use that for a cold air or appropriate intake. Sent from my boujea ass phone
  3. civteck

    New honda owner.

    That noise sounds funky.. make sure the timing belt is not over tightened first. Then i would pull the ps belt, then alt belt to eliminate a possible bearing on either before you call it a timimg issue. Sent from my boujea ass phone
  4. civteck

    New honda owner.

    Thats for the heater circut on the 02 sensor, if you have a bung in the pipe just add a sensor if not have a muffler shop weld 1 in for you add the sensor and move on to fun with the car. No problem with the help just glad you were willing to trust and have the ability to be able to learn and...
  5. civteck

    New honda owner.

    Is the broken sensor a 1 wire? If so its prib the temp gauge for the dash, the 2 wire sensor i believe is the fan switch. Sent from my boujea ass phone
  6. civteck

    New honda owner.

    Pics or vid, its a honda Honda swap what dont fit? Sent from my boujea ass phone
  7. civteck

    New honda owner.

    Dont worry about this till and if you add a vtec head.. Sent from my boujea ass phone
  8. civteck

    New honda owner.

    As long you lengthen the correct harness any wire will do. I suggest using heat shrink connectors or solder joints. Sent from my boujea ass phone
  9. civteck

    New honda owner.

    Aww s**t looks like a fun car is about to be had... Sent from my boujea ass phone
  10. civteck

    New honda owner.

    If you keep the obd1 p75 i dont believe the obd scanner will work but you know how to retrieve the codes as you showed in the vid. I personally would keep the p75 and get a new harness and go from there. If i had to guess the harness in your car was hacked maybe to add gauges of some sort but it...


  11. civteck

    New honda owner.

    https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/92-00-honda-acura-engine-wiring-sensor-connector-guide-3146770/ Honda-tech has all the info you need mostly in stickys give it a thunb through Sent from my boujea ass phone
  12. civteck

    New honda owner.

    2nd 1 only because you already have an obd2 dist. Its the diff between obd1 engine harness and obd2 engine harness. Just make sure when you get a harness its obd2a from 96-98 not obd2b which is 99 up. Sent from my boujea ass phone
  13. civteck

    New honda owner.

    https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/92-00-honda-engine-swap-wiring-guide-vtec-non-vtec-2987229/ Give this a good read theres a part midway down says obd2 using p75 Sent from my boujea ass phone
  14. civteck

    New honda owner.

    It can be either vtec or not, if you get a vtec harness there will be 2 plugs not used no big deal. Your harness is obd2 looking at the dist single plug. Your motor IS an obd1 maybe even an obd0 integra if you look at the block code it will say B18A. You can take any obd0, obd1, obd2 motor and...
  15. civteck

    New honda owner.

    Speedo is a plug on top of trans under the intake tube near the firewall. If you have a 1plug dist then you need an obd2 engine harness from your model, yr car it can be a single cam it makes no diff so it should be easy to source. When you remove it use a sharpie and lable every plug you remove...
  16. civteck

    New honda owner.

    Harness yes ecu no.. now we have codes to go off were gettin somewhere.. 3 map sensor 6 coolant temp 7 throttle angle 10 intake air sensor 14 electronuc air control That sums up what we were thinking all along. Look at the dizzy plug is it 1 plug or 2? If you have a boneyard close where you can...
  17. civteck

    New honda owner.

    Do you have any buddies with an obd1 honda that will let you try their ecu? The fact you have multiple clips unplugged and no cel is concerning. Sent from my boujea ass phone
  18. civteck

    New honda owner.

    Sry i dont have facebook or any social media besides these forums. If you can upload it to youtube and send me a link that might work. Sent from my boujea ass phone
  19. civteck

    New honda owner.

    The last pic is the iat, intake air temp sensor. The 1 under the dist if its a single wire is the temp gauge on the dash. The 02 sensor will have very little to do with much as it runs in open loop over part throttle, although you should have 2 cel's for not having 1, a heater circut cel and a...
  20. civteck

    New honda owner.

    No prob i dont mind helping those that are willing to listen and try things. Im off tomm so maybe ill go to my Civ, setup my meter and show you what i mean and how to troubleshoot wire for wire. You would think this is bad but im an elevator tech and ill attach a pic of what i troubleshoot...
Top