Search results

Any 3 point bar will I could find pictures of only show on EX trim. Neuspeed, well that fit but rare.. My option, seem like only 1, is intake manifold swap. With that, I can basically get any strut bar available.. Seen one DC bar that would fit. I was hoping for more option without having to...

First let me publicly apologized for making it a sound like I'm a jerk. It was not intentional. I simply ask for other to please post photo, and not get into a heated debate about whether it help the chassis or not. Because in the past, may it not be here, topic always get derailed. Then people...

No one at all?

Either drill out the old stud or replace with new lower control arm. Which may be a lot easier to replaced full control arm and new hardwares (endlink) for the sway bar.

I am looking at strut tower bar and see what you guys/gals have installed. I am only interested in seeing photos. My car being an 98 LX trim. Seems like there aren't much option, due to how the air box is fitted. Let see what you have. TIA

What better way to spend on a rainy Sunday? Vacuum. Yes, indeed. Vacuum with a shop vac. Since the weather is horrible I decided the interior needed a good vacuum from front to back. Took the seats out, took out the center console. Some idiot spilled coke/pop drink some long time ago and it was...

Are the ignition wires in correct order? Last time i hook it up wrong and it wouldn't start either. Check firing order. May or may not help. Worth a try.

Time for some update. Still waiting for better opportunity to do the window. But, i did manage to do some other things i wanted. Swap out clust and climate control leds. So much better. I can see now. Relocate the aftermarket HU to the cup holder space. While keeping the oem radio up top for...

This afternoon i "attempt" to fix the passenger side window, it does not roll down. Took the fender off and found 1 broken wire. Come to find out, it's not even the wire that power the window. But i fixed the broken wire anyway.. Whatever it power, now it will work i guess. Anyway, the window...

Check the fuse under driver side dash.

Thanks man. I like my vehicle to be in great condition. Minimum to problem free. I still have couple small kinks that need to get straighten out. But due to cold weather, i am being pushed back til warmer season. But for now, its good to go.

Bring back from the dead. Anyone know what bulb size is used for the AT gear indicators? The D4 on my cluster is dead, pretty certain its burned out. What size would I need to replace with? Thanks

Pull the code. See what its telling you.

It is finished. Everything works now, except passenger side window. Lock work. All other windows work.. I'm going to wait til next spring to fix the passenger side harness. I'm sure its just as bad as the drivers.

Try #24

Update. Just left the 2nd junkyard. Success today. Found what I needed at both places. Had to cut the harness because door were shut tight. Will update once I put everything back together. Also, I will be doing a little tune up too with these parts. Not pictured are pureone oil filter and...

Understand. If you don't mess with the hinges themselves. It won't be out of alignment. You just need to remove the rod/bolt holding the hidges to each other. Very easy. You should try it sometime.

Question. The wiper lever switch. When pull down the wiper will come on at max speed. It supposed to spring back up to normal position when you let go of the lever, correct? Or is it supposed to stay down? I think mine may be broken. It does not swing up when let go. Stuck in the down position...

I have to partially disagreed with this. You do not have to pull fender and side skirt. Only the door. Unplug harness. Remove 1 12mm bolt on the door swinging arm. Remove top and bottom "c" clip on the hindges bolt. Pry the hinges bolt out. Have a friend hold the door while you do that. Door...

Noise present while in steady motion or only over bump? Have you check motor mount? What about the condition of your struts? I would alsdo check exhaust heat shield.