Search results

Do the tein s lower the car 1.5 all around or 1.9F/1.7R? Cuz the description says 1.5 in general but for vehicle (2000 ej6) specific its 1.9F/1.7R?

What about the progress tech springs on the site's store page? Any input on those, cuz at 1.5" drop plus after they settle, they kinda sound exactly what I would want although Im confused on the whole spring rates ordeal

I just bought a brand new set of tokico blues intended for my DD and Im in the market for new springs, I was thinking the eibach sportlines for around $200 shipped. Any other ideas? And coilovers are out of the question. Again its just for a street DD. Thanks guys

Yeah from autozone for $40 cuz I had a coupon plus the points I had on my card k, distilled water it is just to be on the safe aide :-)

I'm replacing my OEM radiator because it already cracked for the second time (1st time I used the glue stick epoxy thing to fix it, it actually worked for like a year!!!) anyways, I figured that since I'm changing the radiator I might as well change everything (hoses and thermostat). Now to...

Mmmmm well I was doing it for the performance gain, but since Jersey8 said what he said, then I'll just forget about it and save myself the money, I could still do it to add a strut bar but thats like whatever to me. Thanks all of you though. Guess I'll buy a radiator with that money then cuz...

The thing is im in cali and all its emissions laws, so I dont even bother to look at that stuff that needs direct unrestrictive air flow in and out the car

I'm no expert but I'm pretty sure it adds a couple HP cuz of the less restrictive air flow into the engine. All the places, diy's, posts, and forums I've searched have said the same thing. A swap, headers, exhaust, or adding vtech woul be much better I'm sure, but I dont need that as I dont...

By the way, the parts are from a donor manual '97 EX and mine's a 2000, would that matter? I'll get the parts next weekend when I meet up with the guy

Its manual sorry

I wanna di the swap but I'm not sure if my car will pass the smog test here in california with all its regulations and stuff, does anyone know if it will or if it will cause any problems? Also the parts I need from a y8 is the IM, TB, and the y8 throttle body rotor right? Anything else?

Yeah I did bled them but I didnt break them in, usually I just replace them n they're good, my dad's car brakes where fine after I replaced them and I used the same procedure, straight replacing. How would I break them in? I did RP, FD, RD, FP and a lot of air bubbles came out but after three...

Do the washer trick. Alignment shops wont fix ur rear camber unless u have a camber kit (which for the rear are absolutely useless). I used 2 3/4" galvanized washers on mine, I read online that 2 washers give u 1 degree of positive camber, thus fixing ur current - camber. If u need longer bolts...

So it was time to change my brakes and so I did, I took the front disks to get resurfaced/turned, and put the new brakes back on with disk brake quit liquid and the next day I checked the disks and they look weird, the inner half of the disk (center to mid disk) is still blank just like when I...

Heres the problem guys n gals, my passenger corner signal light flashes very fast and when i have the fogs and headlights on (they're conected with each other), they dont blink at all and i dont know what the problem is, anyone have any ideas what the problem migt be? I got 6k hids in both the...

I call it a machuelo in spanish and it works wonders, thats what I used to remove those infamous honda factory screws

Although I cant tell you for sure how long the struts should last, I think you can replace the struts on ur own and save the labor money. Heres this DIY I found might help: http://www.clubcivic.com/board/showthread.php?t=130371

^PM'd

Bump. Anyone interested?

6K H3 HID's in fogs. Comes with play-and-plug fog light wire harness and frames to bolt onto the bumper (not in picture). Were only used on car for about 2 months, asking $60 shipped firm. GSR rear sway bar for sale with Honda Si Brackets (to subframe) and complete Honda Si D-brackets, all...