i would suggest you let that to a mecanic...atleast thats what I did on my Y8 ...and if you know him he'll hook u up with a cheap pricedryeager said:Does anyone have a general or specific write up on how to do this on the D16y7? I know the clearences but am not 100% sure about how to adjust them.
dryeager said:Thank you! I will give it a try this weekend.
WRONG!!! you dont do 1-2-3-4 I belive it 1-3-4-2 ill look for the link i used and get back to ya.......highcompracing said:Its pretty easy, put the engine in timing start with 1-3-4-2. When the engine in timing start with number 1 first then turn the motor by the crank 90 degrees counter clockwise then do number 2. and keep going till all is done.
mracer29 said:WRONG!!! you dont do 1-2-3-4 I belive it 1-3-4-2 ill look for the link i used and get back to ya.......[/QUOTE
I am sorry but I don't know were you got 1-2-3-4. . I never said that.
Awesome link!mracer29 said:
Oh ok I was just answering what you asked.Dont_Tri said:Does this work the same for a DOHC? I would like to adjust my valves also but this article is for the SOHC.