AhxHourt
New Member
Alright im pretty sure everyones been asking alot of questions about this swap and posted but ive been reading alot and finding answers but some answers im still curious about. I put together a whole list of what i will try to be getting and what i think i need below. This is gonna be my first time doing a swap for my car so i want everything done right the first time. Im gonna take time to build this motor so its not gonna be a 1 month swap.
The motor that i have is a B18a1 OBD1 came off of a 93 integra. Which is going into my 00 Honda Civic DX OBD2.
Tell me what u think about my list if its right or wrong and what else i would need. I have the questions on my list once u take a look at it. It would be great if they all can be answered!!!
Things I already have:
-B18a1 Block
-B18a1 head
Things I need:
-ECU P75 OBD2 96-00 Integra LS
-Harness- DX harness, you'll have to extend the TPS/MAP sensor plug, and re-pin the IACV<-- I read this on a forum is this true?
-Exhaust Manifold(Megan)<-- 92-93 or 94-01 headers which do i need to fit my car?
-Exhaust(Greddy EVO2)
-B Series Hydro Clutch and flywheel(ACT)
-B Series Hydro Transmission
-Intake Manifold(Skunk2)
-Throttle Body(Skunk2)<--Does it matter what kind of B-Series Stock TB im using if i dont get the skunk2 TB?
-New Gaskets
-Spark Plugs and Wires(NGK)
-Distributor<-- Do i need the b18a1 dist.?
-Alternator<-- Do i need the b18a1 alt.?
-Mounts(Innovative)<-- If i go cheap instead of innovative mounts, which stock mounts would i need?
-Power steering pump (cuz it didnt come with it)
-Axles(Hasport): 90-01 Integra/99-00 Si
-Shift Linkage: 94-01 Integra/99-00 Si
Im pretty sure i went through everything i needed if not please comment. and im sure this will be a great help for alot of other ppl doing this swap cuz its all on one post.
The motor that i have is a B18a1 OBD1 came off of a 93 integra. Which is going into my 00 Honda Civic DX OBD2.
Tell me what u think about my list if its right or wrong and what else i would need. I have the questions on my list once u take a look at it. It would be great if they all can be answered!!!
Things I already have:
-B18a1 Block
-B18a1 head
Things I need:
-ECU P75 OBD2 96-00 Integra LS
-Harness- DX harness, you'll have to extend the TPS/MAP sensor plug, and re-pin the IACV<-- I read this on a forum is this true?
-Exhaust Manifold(Megan)<-- 92-93 or 94-01 headers which do i need to fit my car?
-Exhaust(Greddy EVO2)
-B Series Hydro Clutch and flywheel(ACT)
-B Series Hydro Transmission
-Intake Manifold(Skunk2)
-Throttle Body(Skunk2)<--Does it matter what kind of B-Series Stock TB im using if i dont get the skunk2 TB?
-New Gaskets
-Spark Plugs and Wires(NGK)
-Distributor<-- Do i need the b18a1 dist.?
-Alternator<-- Do i need the b18a1 alt.?
-Mounts(Innovative)<-- If i go cheap instead of innovative mounts, which stock mounts would i need?
-Power steering pump (cuz it didnt come with it)
-Axles(Hasport): 90-01 Integra/99-00 Si
-Shift Linkage: 94-01 Integra/99-00 Si
Im pretty sure i went through everything i needed if not please comment. and im sure this will be a great help for alot of other ppl doing this swap cuz its all on one post.