b20 vtec build?

[windle]

i have a 95 delsol si with the d16z6 and i just picked up a b20b and a gsr head. planing on putting this together and putting it in the delsol. i just need to know what else i will need to get this running like what chipped ecu, tranny, can i use the stock axles, harness, other things ill need to get or so info i might need to know would be great.

 

[CO671]

Please do your research on your own terms. Posting a thread an asking for advice will give you few results
Take into consideration:
1) How many members have experience with this actually?
2) How long will it take to get a proper response?
3) How thorough will that response be?
4) Is there any faster way to figure this all out? YES
5) Search


Here are links i have
http://www.b20vtec.com/

http://hondaswap.com/general-tech-articles/how-build-reliable-lsvtec-b20vtec-70187/
http://www.clubcivic.com/board/showthread.php?t=196936
http://www.clubcivic.com/board/showthread.php?t=196432
http://www.hondahookup.com/info/engine_swap_faq.php
http://www.team-integra.net/forum/14-performance/258-ls-vtec-basics-building-one.html
http://hondaswap.com/general-tech-articles/assembling-ls-vtec-32829/
http://hondaswap.com/general-tech-articles/ls-vtec-cr-vtec-info-8/
http://www.clubcivic.com/board/showthread.php?t=196432
http://hondaswap.com/engine-building/crvtec-build-price-383/
http://www.b20vtec.com/forums/b-series-tech/13263-b20-lsvtec-faq-parts-list.html



I actually have a ton of bookmarks because I was looking to do this swap for my CRV

 

[windle]

so i can use a p72 ecu gsr oil pump, belt, and water pump, a gold eagle b20 vtec head gasket, the stock d16 harness. would i need a cable or hydro trans?

 

[Tegyb20b]

so i can use a p72 ecu gsr oil pump, belt, and water pump, a gold eagle b20 vtec head gasket, the stock d16 harness. would i need a cable or hydro trans?

Your going to need more than that. B20 stock short block will not hold the p72 redline. An should not exceed the stock 6,500 rpm redline for the b20.