Hello new here. I recently had my clutch done and I had to twist that push rod in the master to get the clutch to engage. What's the rule of thumb for adjusting that as I know it's not really to spec. Iv seen a few different numbers from searches as far as pedal hight but I'm honestly confused as to where exactly I'm measuring to and from. If others do this another way with good results is like to know. For now iv got it driving just fine with ~1/2 inch of free play and the rod not quite flush with the inside lip of the threads to give it a little more throw. If I'm not hurting anything pls let me know because I don't want to stress over something I don't need to fret about. I'm pretty new to at home mechanic work and clutch was my first big job with a buddy. Thanks.