crx hf axel oh boy...

[CRXsiterror]

Ok, so im reading around HT and theres people saying my little HF hubs and knuckels are smaller than a si does that mean I have to change everything over!?!?!? I wana put my spare d15b7 in the rex for now would I have to change some stuff?? this sucks

 

[Steven.]

use the tranny you have now, HF,DX,SI alxes are the same.

 

[CRXsiterror]

so your saying I have to stick with crx axels only?? i have 92-95 axels I was sondering if those would work..? I'm gonna have to use my s**t hf axels on my zc? and I will have to get a si tranny becuase im not useing that s**t hf one.

 

[Steven.]

get SI ones then.

 

[orfus5]

just keep using the hf axels and change the engine.
or change the hubs and use dx/si ones
hf axels are not the same as dx/si

 

[Steven.]

ive used HF axles with SI knuckels and SI tranny.

 

[orfus5]

ok..........

 

[CRXsiterror]

ok guys so witch one is it I can use my hf axels and hubs with my b7 engine and axels??

 

[Steven.]

so means there the same.

 

[CRXsiterror]

ok so its 100% that my 92-95 axels from my b7 will work in the hubs.

 

[orfus5]

hf axels have 23 splines on the outer part, while si/dx have 26.
so i highly doubt you were using hf axels on your si

 

[Steven.]

sorry, yeah must have been DX axles, it was a while back, ok DX,SI,LX,EX axles are the same, STD and HF are diff.

 

[orfus5]

yea i learned the hard way when doing a swap.

At least you know now!, and knowing is half the battle!

 

[Beelzebubba]

My friends D15B swap into his CRX hf required a trip to Driveshaft King in Dallas for completion.

 

[CRXsiterror]

ah thanks that what I needed to know ... wtf is with the captian planet bs hahaha