custom painted valve cover

Status
Not open for further replies.

CivicEX13

CC's Valve Cover Guy
Registered VIP
5+ Year Member
10+ Year Member
well today i finished another valve cover i picked this one up at the junk yard for dirt cheap...shaved it and painted it...this was all done with auto paint like my first one and the paint is sikkens...leave some comments and if you would like one painted send me a pm and we can talk about it







and for those who forget this is the one i did that is on my car



and my custom block off plate i painted



Nissan Sentra Valve Cover..Shaved Twin Cam 16 Valve and casting lines...silver metallic blue with white splatter and polished nissan lettering




This was done for a member on here icwicked he wanted red metallic dc's ove black metallic and shaved honda





here is job i did for my buddy on his 07 si sedan...it isnt finished yet that doesnt have clear on it he is not to sure if he likes it but here is pics of it on his car




this one was done for XpL0d3r a member on here


heres one i m in the process of doing not to sure how i m goin to finish it up but here ya go



greenish blue gunmetal with a polished rising sun...got some imperfections but still looks badass this is also FOR SALE lmk if interested

 

civicturbo91

professional bitchslapper
Registered VIP
5+ Year Member
how did you do the stencil? i know where you got it and all cuz i hjave one but how so clean?
 


Bruckhoff_34

Built not baught
Registered VIP
5+ Year Member
damn dude that looks amazing! almost to nice to put under the hood. i would show off your valve cover every chance you get. rising sun FTW
 

CivicEX13

CC's Valve Cover Guy
Registered VIP
5+ Year Member
10+ Year Member
thanks guys and the famous i used the stencil that came with a shirt and my air brush
 


Rawkout

New Member
5+ Year Member
man first thought"HOW?!?!" thats awesome, you should post some pics of the steps and whatnot
 

CivicEX13

CC's Valve Cover Guy
Registered VIP
5+ Year Member
10+ Year Member
lots of time and just being careful i can give a list of steps and on the next one i do i will do pictures of it all

1. i use stripper and strip all the paint off the valve cover
2. get out my grinder and grind down the casting marks and the honda or h or whatever is on it
3. sand over the grinder marks with 80 grit, then 180, 220, 320
4. any paint left on in the hard areas i sanded with 320 by hand
5. acid cleaned it with wheel acid cleaner
6. ran it through the parts wash to help clean grease and what off it it
7. decreased it with degreaser
8. acid washed it again
9. put down a thin coat of acid etch primer
10. then 3 good coats of filler primer
11. left it dry
12. block sand the flat areas with 320 and hand sanded the rest with 320
13. solvent cleaned it
14. sprayed sealer over it
15. Then sprayed black base coat
16. then misted a gold pearl, silver metallic glitter and a hint of red pearl over it
17. sprayed 2 good coats of clear
18. left dry
19. wet sanded with 1000 grit
20. got my stencil and my air brush and sprayed gold and cooper pearl to fill in the Famous F's
21. sprayed 2 more coats of clear
22. left dry
23. wet sand with 2000
24. buffed it with compound and waxed it

thats about it lol
 

Genuine Rolla

Its PETEY PETE, y0!
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
Very nice attention to detail bro...I think you've inspired me....! :thumbs up
 

CivicEX13

CC's Valve Cover Guy
Registered VIP
5+ Year Member
10+ Year Member
thanks guys and pete go for it man it is a great way to kinda be artistic
 

Tom

honda.co.jp
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
20+ Year Member
I've seen the block off plate in person, don't remember your valve cover though, but i do admit your car is damn nice all together including your little handy work right thur.
 

NoWayBack91Si

New Member
Registered VIP
5+ Year Member
10+ Year Member
holy s**t! that valve cover is sick!!! like im droouuling as we speak lol

is there anyway you do one of my valve covers?
 

FRODO

New Member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
anyway you could do a volcom valve cover for me. PM me a price with you gettnig the valve cover and one with me giving you the valve cover if you can. thanks.
 

sohclubkid

Sick 6/6
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
damn... thats REALLY nice man.

i think i might have to get you to do one for me in the future...
 
Status
Not open for further replies.


Top