DIY: Camber Kit Install

ThaJokaa

Buildin..???
Registered VIP
5+ Year Member
Tools Needed:
14mm Wrench /// Bolt Remover Thing (cant think of name)
Air Wrench

and of course the camber kit



Step One:
Remove Your Tires
Not Much to tell on How to Remove Your Tire....


Step Two:
After Tire Removal it should look like this

Get The Air Wrench with the 14mm and remove the screw/bolt whatever you call it... =) (the red arrow is pointing at it)
After it should look like this

then take off the other two bolts in the back and remove those so u can put on your new ones...

Step Three:
Sorry No Accurate Pics for this one Install the Camber and adjust it to how evr you want it to be from 2-5 inches

you can move the center peice to move it to the desiered lenght

after your wheels should be straight



Its not the hard to take out and install
BTW: Its My First Write Up So Im Going to update it later thanks
 

TheRealPeterman

New Civic Fan
5+ Year Member
Pretty straightforward install. Wondering, though...........why are u putting a camber kit on a seemingly stock suspension? what'd i miss?
 


Kaotic_Zeus

Most hated man
Registered VIP
Registered OG
5+ Year Member
torque specs? isn't one hole a different shape on the camber kit than the other one?
 

ThaJokaa

Buildin..???
Registered VIP
5+ Year Member
Pretty straightforward install. Wondering, though...........why are u putting a camber kit on a seemingly stock suspension? what'd i miss?
because my wheels were right and it was eatin up my tires

torque specs? isn't one hole a different shape on the camber kit than the other one?
??? what are u talkin about??
 


Kaotic_Zeus

Most hated man
Registered VIP
Registered OG
5+ Year Member
on the camber kit where it bolts to the frame, is one hole different than the other? look at the stock one closely.
 

EK|B

New Member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Did you get an alignment?
 

SupaSedan

New Member
5+ Year Member
Am I looking at the stock 185 steelies or did you pop some bigger 4x100's on there?
 

Raabe

Hell yea I suck toes!
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
hand tools do the job just as well
 

StacyBaby2o6

New Member
5+ Year Member
cambers i ordered off of EBAY




so, i've been searching all over the net to get an idea of what's happening to my car if and when my brothers friend installs the camber kits for me in my 92 hatch. i bought 'em off of EBAY. I'm starting to wonder if I even bought the right ones. I have not received 'em yet. HELP!!!
 

StacyBaby2o6

New Member
5+ Year Member
cambers i ordered off of EBAY

so, i've been searching all over the net to get an idea of what's happening to my car if and when my brothers friend installs the camber kits for me in my 92 hatch. i bought 'em off of EBAY. I'm starting to wonder if I even bought the right ones. I have not received 'em yet. HELP!!!
 

StacyBaby2o6

New Member
5+ Year Member
cambers i ordered off of EBAY

so, i've been searching all over the net to get an idea of what's happening to my car if and when my brothers friend installs the camber kits for me in my 92 hatch. i bought 'em off of EBAY. I'm starting to wonder if I even bought the right ones. I have not received 'em yet. HELP!!!

<a href="http://s155.photobucket.com/albums/s302/KHMERL0VE2O6/?action=view&current=163403525_o.jpg" target="_blank"><img src="http://i155.photobucket.com/albums/s302/KHMERL0VE2O6/163403525_o.jpg" border="0" alt="Photobucket"></a>
 

StacyBaby2o6

New Member
5+ Year Member



so, i've been searching all over the net to get an idea of what's happening to my car if and when my brothers friend installs the camber kits for me in my 92 hatch. i bought 'em off of EBAY. I'm starting to wonder if I even bought the right ones. I have not received 'em yet. HELP!!!
wtf wont my pictures show up???
 


Top