DIY - SWP B18c6 in ciid Ed7 - Team91 FRANCE

Team91

Team91 - Race BeGinS NoW
*** SWAP B18C6 -- DO IT YOURSELF ***

1 - Buy a B18C6 preferably with MAXIMUM devices (Boxes, Cardan shafts, harness, air box ...) about 2500?? (Supplied) in England.


2 - Unpack ENGINE / Verify that this is indeed a B18C6;-)


3 - Removing old BLOCK


4 - Prepare the engine and check its state:
- Flywheel lightened
- Changing Candles
- Distribution + water pump
- Setting rocker
- Pulley EK9


5 - Preparation BOX
- 4 and 5 Vti


6 - Keep the anchor point of the media law (in front of the engine) and put B16A1 B18C6 on


7 - Replace speed sensor B16A1 for the counter that works.


8 - Keep the support of the AR BOX B16A1 (for passing the redrill the 2 screws)


9 - Set Kit Hasport EFB2


10 - Case P28 Chippé


11 - Harness Harness + modified


finish:



[! ] INFO:

- Resume INTEGRA Exhaust Manifold: redrilling holes in the décata to get it right.
- Integra Cardans OK no problem
- Gearbox on Ok button it does NOT ED (buy conversion Hydro / Cable)
- Do not forget to raise the hood to the Bloc does NOT touch.

Video EDITING:
http://youtu.be/olYXqRQbV5k



IN hoping it help + a!

and hope to see on TRACK PEOPLE!

Team91 - RaCe BeGinS NoW. . .
 


Top