Ecm alternator problems

vep

Newbie
5+ Year Member
10+ Year Member
Hey all been a while but I put a motor in my 96 lx d16y7 got it all running but iac valve.
So a few weeks back got a cel for the iac which I knew was bad
But the battery was not getting 14v running so I ordered a new alternator too.
Installed them Iac works great but alternator the same also my code reader will not connect
I think something went bad between the last time I read a code
Checked fuses 15 for sure anyone have any ideas
 
Last edited:

vep

Newbie
5+ Year Member
10+ Year Member
Turn the key on. Then check whether the battery light/charging light in the cluster turns on and stays on.
It does
 


vep

Newbie
5+ Year Member
10+ Year Member
Warning light of get about 12.4v
 


vep

Newbie
5+ Year Member
10+ Year Member
The only thing I did before the problem occurred was change the t-stat I think
 

vep

Newbie
5+ Year Member
10+ Year Member
Cables are connected gonna start it and see what lights are on now brb
 

vep

Newbie
5+ Year Member
10+ Year Member
Ignition oil and battery lights.
Engine running no lights.
I am hearing clicking noises from the shifter in park too
 

vep

Newbie
5+ Year Member
10+ Year Member
I cleaned the g2 ground and wiggled the ground at the stat since that was the last place I work on and got 14v and my obd2 reader back
 


Top