Engine no crank, no start after removing aftermarket alarm system

[Divesh Soma]

Hey guys, I'm having a problem with my 97 Honda Civic/Ballade 150i. I recently removed the aftermarket alarm system as it was giving problems but , the two plugs that I disconnected the alarm system from is now hanging loose with nowhere to connect and I have also identified a relay connected directly to the starter motor. The lights on the cluster switch on as usual but nothing happens when I turn the key to the start position. How should I go about bypassing the connections?


The two blue wires are where I disconnected the alarm system from


And this is the relay connected directly to the starter.

 

[D_Low_era_90]

Do the blue connectors go to the factory wiring harness or are they part of the aftermarket alarm? You need to start with removing EVERYTHING that is aftermarket and reconnecting all factory wires that may have been cut for the alarm installation.

 

[D_Low_era_90]

Get rid of whatever that relay is wired to your starter. It’s trash.