Fully Built R18A1 *World First*

Status
Not open for further replies.

420Coupe

New Member
5+ Year Member
A little introduction I will have the progression of the build in chronological order. First page is the Turbo kit Build, Second Page will be Motor build thread.


*Stainless steel Turbo manifold,Downpipe,Dumptube
*Aluminum 2.5in Intercooler piping
*Aluminum 3' Inch intake with KN filter
*intercooler
*Tial 38mm vband
*Tial 50 mm blow off
*Precision 5857b turbo
*Walbro fuel pump
*FIC 625cc injectors
*Flashpro
*CMB tuning - by Colombia!

Heres some Pics of the progress, amazing welds !!











:turboleghump::vtec:

FINISHED PRODUCT






























Dyno Results were @ 7 psi

Full Motor Build

Engine -
*R18A1 Block
*CP Pistons
*Pauter Rods
*Golden Eeagle Sleeves (Machine Work)
*Custom ARP Head Studs
*Ferrea Racing Custom Retainers
*Ferrea Racing Custom Springs
*ACL Race Bearings
*Injected OEM Mounts (3M Window Weld)
*Custom Intake Manifold - by Gato Performance
*Thermal Gaskets
*GoPower Cam (still debating)

Transmission - (lets see till when it holds!)
*MFactory Helical LSD
*MFactory FD 4.678
*Clutch Masters 'Stage 4' 6 puck clutch
*Stainless Steel Clutch line
*Hybrid Racing Shifter Bushings
*Hybrid Racing Base Bushings

Forced Induction -
*Gato Performance R18 Turbo Kit
*Precision 5857 Journal Bearing Billet .63 A/R (Ceramic Coated)
*DEI T3 Turbo Blanket
*Tial 38mm vband
*Tial 50 mm blow off
*Hondata 4bar Map Sensor
*Skunk2 76 mm Exhaust
*Stainless steel Turbo manifold, Downpipe, Dumptube (Ceramic Coated)
*Aluminum 2.5in Intercooler piping
*Aluminum 3' Inch intake with KN filter
*intercooler
***CMB TUNING***

Fuel System -
*255 Walbro Fuel Pump
*Jotech Fuel Return Kit
*Fuel Injecter Clinic 1000cc Injectors
*Custom Fuel Rail
*All fittings will be AN and Stainless steel Braided lines

Suspension/Brakes -
*Skunk2 Pro-C Coilovers (8k Front, 12k Rear)
*Full-Race Traction Balls
*Goodridge Stainless Steel Brake Lines
*ARP Extended Studs
*Hawk HPS Front


Up'ed the boost to 9 psi and results are as followed









Transmission






4Piston Racing - port and polish


World's First Sleeved R18A1 thanks to Golden Eagle!






 

420Coupe

New Member
5+ Year Member
Thank you!!

Although I do recommend everyone to do their research on the speed/ performance shop before hand. I got fked badly car still is not finished and it's been over a year.

But definitely an experience and had a lot of help from a lot of different big companies thanks again to Golden Eagle, 4Piston Racing, Gato Performance, Ferrea Racing, ARP, Hondata, and let's not forget best tuner in the world CMB tuning!
 


420Coupe

New Member
5+ Year Member
awsome work and what exactly did you get f*cked with?
They held onto the car for over a year and have only in the last 3 months really done any work to my car. Blow my deposit for parts on their shop cars and still have yet to get it complete
 

MistahJuice

100% real juice
Registered VIP
5+ Year Member
10+ Year Member
f**kin sweet, rare to see something different in the Honda world nowadays. Bookmarkin this
 

2slo4u

wait4me
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
looks good..but worlds first? don't think so

boost is :thumbup: though
 

420Coupe

New Member
5+ Year Member
looks good..but worlds first? don't think so

boost is :thumbup: though
No sorry boost is not world first, Built is world first though. No one has ever done sleeves Thanks for useless info buddy!

Russians Had first internals made, but still nothing for sleeves which is why no one exceeded 1.5 bar, let alone the intake manifold is a plastic POS
 

Logan98036wa

New Member
Registered VIP
5+ Year Member
Very nice, I was just thinking about how cool one of these would be, glad I could see it.
 

xxBLOOD88SHOTxx

Surge Master
Registered VIP
I do like the build, but what kind of numbers are you shooting for? That is an assload of money into a build and I hope youre happy with it, sucks you had to wait so long to enjoy it.
 
Status
Not open for further replies.


Top