Your making good progress....more pics while your working. Keep up the good work.
What did you use to clean the engine?
What did you use to clean the engine?
Honda Civic Ef1
- Thread starter Colin_D13B
- Start date
thanks dude
more progress and pics tonight
more progress and pics tonight
Hey dude , the hole above the p72 stamp is a hole in my sumpDamn bro, looks good, what is that hole above by the p72 stamp? Maybe I am missing something?
You should clean and paint your block/transThey look sooo nice all painted silver with high temp
And the engine is being painted
What are u cleaning the engine with?
I used Autoglym engine cleaner on the bay
And i used brake dust remover/part cleaner on the motor and a wire brush
o ard....before and after pics....
Very nice. Makes me wanna go get my engine esp. cause its already stripped down! lol
Do it man makes a big difference
After the new years im gonna get started. Looks like ima have monday and tuesday off work to do so. lol
WoW!
Havent updated here in a year
Lot done since
Will update asap
Havent updated here in a year
Lot done since
Will update asap
Please do, this car was looking awesome!
As the car sat
Doner Engine To Help With the loom tuck
Dropped in
Got a few bits for my brakeline tuck (I Later removed all the copper piping and went complete braided)
Prop Valve Behind Dash
Few Pics Of my Rays Eng. Group N-RS Before Refurb
And Finished
Interior Shot
Engine Bay As it stood
Purchased some Hasport Stage 2 Axels
Honed my cylinders
Goodridge Braided Brake Lines
96 Spec ITR Wheel
98 Spec ITR Shifter
Carbon Plug Cover
Doner Engine To Help With the loom tuck
Dropped in
Got a few bits for my brakeline tuck (I Later removed all the copper piping and went complete braided)
Prop Valve Behind Dash
Few Pics Of my Rays Eng. Group N-RS Before Refurb
And Finished
Interior Shot
Engine Bay As it stood
Purchased some Hasport Stage 2 Axels
Honed my cylinders
Goodridge Braided Brake Lines
96 Spec ITR Wheel
98 Spec ITR Shifter
Carbon Plug Cover
So brought the car to a friends to a bit of work,
Excuse the 17" wheels. Was waiting for tyres to come for the Rays
Here is the tuck completed
Delighted with results
Test fitted my Ef9 Black Dash And SiR Cluster
Quick Shot Of Interior With Rusty Cage
Another Interior Shot With Centre Console & Door Cards
Cage Painted.. I dont wait around
Custom Fit 98 Spec ITR Boot Brace
So Started Welding Up all unused holes in the bay
All Done
Split and painted my front suspension Parts and cleaned & greased my discs as i was sick of them
rusting while it was sitting up
My tyres Arrived so it would be rude not to fit them right away
My Blox Extended Studs Arrived this morning
So wasted no time..
Centre Bar of cage painted & Fitted
Engine Bay Smoothed & Masked
A few shots with the wheels,studs,camber arms fitted (excuse crappy phone shots)
Temporary suspension
Blox Extended Studs & Blox Extended Nuts
SPOOOOOOOON!!
Shocks In .. Braided Lines In
Rear Extended Studs in
Rear Camber Arms In
Tried fitting the 98 spec shifter onto my ef9 linkages but the base of the shifter was too wide
So i cut the end off each shifter (98 spec & ef9) and welded the ef9 end to the 98 spec shiter.
Result..
Painted Intake Manifold
Polished Injectors (before/after)
All Done
Back in the manifold
Fuel Rail Back on
Gearbox Painted
My Ek9 Crank Pulley Came In
My Repair on my megan 4-1 (i know,i know .. Megan buts its temporary)
FInally Got around to painting the bay
Pics Speak For themselves
Bonnets a bit damp/dusty in this pic
Finally got my machined rods back
So fitted pistons and rings and then it was time..
Head Torqued down
And a quick paint of the VC
Few more pieces of the puzzle arrived today (sump gasket,crank seals and throttle body gasket)
and finally the engine as it stands to date
Excuse the 17" wheels. Was waiting for tyres to come for the Rays
Here is the tuck completed
Delighted with results
Test fitted my Ef9 Black Dash And SiR Cluster
Quick Shot Of Interior With Rusty Cage
Another Interior Shot With Centre Console & Door Cards
Cage Painted.. I dont wait around
Custom Fit 98 Spec ITR Boot Brace
So Started Welding Up all unused holes in the bay
All Done
Split and painted my front suspension Parts and cleaned & greased my discs as i was sick of them
rusting while it was sitting up
My tyres Arrived so it would be rude not to fit them right away
My Blox Extended Studs Arrived this morning
So wasted no time..
Centre Bar of cage painted & Fitted
Engine Bay Smoothed & Masked
A few shots with the wheels,studs,camber arms fitted (excuse crappy phone shots)
Temporary suspension
Blox Extended Studs & Blox Extended Nuts
SPOOOOOOOON!!
Shocks In .. Braided Lines In
Rear Extended Studs in
Rear Camber Arms In
Tried fitting the 98 spec shifter onto my ef9 linkages but the base of the shifter was too wide
So i cut the end off each shifter (98 spec & ef9) and welded the ef9 end to the 98 spec shiter.
Result..
Painted Intake Manifold
Polished Injectors (before/after)
All Done
Back in the manifold
Fuel Rail Back on
Gearbox Painted
My Ek9 Crank Pulley Came In
My Repair on my megan 4-1 (i know,i know .. Megan buts its temporary)
FInally Got around to painting the bay
Pics Speak For themselves
Bonnets a bit damp/dusty in this pic
Finally got my machined rods back
So fitted pistons and rings and then it was time..
Head Torqued down
And a quick paint of the VC
Few more pieces of the puzzle arrived today (sump gasket,crank seals and throttle body gasket)
and finally the engine as it stands to date
I've only seen two threads like this and they're both in the 88-91 section! Great job with the build keep it up man this s*** looks great!