Installing Command Start, 2004 Honda Civic


New Member
Hello every one, new to the forums here. I just finished installing a remote start system named "Code Alarm CA5055", alongside with a bypass module from iDataLink. I've got a bit of an issue; once I give the car power, (putting the battery cables back on), the bypass module will just blink red, and when I try to use the remote start button to send a command, such as lock or unlock, the fuse box that is behind the drivers kick panel, will buzz. If I hold my finger to any one of those 4 black relays on that fuse box, I can feel them all buzzing. And the command won't go through, (the lock or unlock or whatever.

I know very little about electricity and relays and switches and all that good stuff, so any help would be appreciated, thanks!