oil line size?

TiiM iiS l3eAsT

Scamming Piece Of s**t
Registered VIP
Registered OG
5+ Year Member
what size does the steel braided(kind im getting) line have to be? will -4 work?
 

deftone

New Member
Registered VIP
5+ Year Member
10+ Year Member
for the feed line? a lot of people say thats to big... i run -3
 


slowhatch

torque?
Registered VIP
5+ Year Member
deftone said:
for the feed line? a lot of people say thats to big... i run -3
how long have you had your turbo on your car?
 


Matt.

Banned
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
slowhatch said:
if you get -4 you need to get a restrictor. http://www.wicksaircraft.com/catalog/product_detail.php/pid=4727~subid=1339/index.html thats the cheapest one i found but you have to drill it out with a 1/16 drill bit. or if you dont want to drill anything http://stealthmodeperformance.com/oil-res.shtml that will work as is.
I'd be worried the pressure to the turbo wouldn't be as great as it should be with that stealthmode fitting where it goes in the drain plug. The oil pretty much just sits in the oil pan, there is really no pressure in the oil pan. I think thats how you're saying for him to connect that.

I think its ment to go inline with the oil line, not on the oil pan.
 

slowhatch

torque?
Registered VIP
5+ Year Member
both go in the inlet oil line, i think the stealthmode one screws into the block while the other one just goes in the line.
 


Top