Post Your 6th Gen Hatch! Comments now allowed!

TonyEK

New Member
5+ Year Member
About my hatchie!



Exterior:
~ Stock headlights painted black housing, the rest stock for now.. (big plans)

Interior:
~Prelude Si seats ( beware u might fall asleep in them) Pionner Head unit relocated to bottem "above cup holder? lol", and Semi gutted for now.

Chassis:
~Koni yellow shocks, Skunk 2 front ingles rear Camber kit, Front and rear strut bar, and rear tie bar, CRX Si wheels.

Engine:
~ D16Y7 - AEM short ram intake, Stage 2 competition clutch, Short shifter, and shifter bushings.

Side engine: D16Z6 being built for turbo. only at first step so far whitch is getting the engine lol


Any Questions or comments feel free to PM!

>Pic Thread<
 

96hx

New Member
5+ Year Member


1998 dx hatch
2000 b16a2
kenji chipped ecu. 6000 VTEC, 9500 redline
ex cluster. ex armrest. knockoff R shiftknob. evaisive shortshifter.
viper alarm with 1/4 mile pager.
kyb agx with ground control coilovers.
15" slips painted olive green
99-00 tail lights.
jdmshit SiR lip.
mugen style cf duckbill ).
oem mudflaps.
rain vents.
jdm ctr mirrors
 

wozzer

wants VTEC
5+ Year Member


1997 EJ9
D2 Coilovers
Skunk2 camber lits
Skunk2 Shortshifter
EM Racing Z Brace
16" Rota Slipstreams & Toyo Proxes
OEM Carbonfibre Bonnet
EK9 grill
EK9 Roof Spoiler
EK9 Headlamps
EK9 rear lip
Ganador mirrors
Mugen front lip
 

D-Rex

New Member
5+ Year Member
Needs some work..... :D



Partslist so far;

Engine;

* JDM B18C GSR spec
* Hasport mounts
* Blox intakemanifold
* Skunk2 Pro Series 68mm throttlebody
* Carbon Airbox Virage CC90L
* ITG filter
* SRR camgears
* Fluidyne high performance radiator
* Summit electric fan
* Samco coolant hoses
* Meziere electric water pump
* Moroso Dry sump
* Setrab oil cooler + Goodridge hoses
* AEM fuel rail
* AEM fuel pressure regulator
* Spoon Sports Oil filler cap
* Spoon Sports Radiator cap
* Spoon Sports Radiator stay (2x)
* Spoon Sports Reservoir tank cover
* SRR oil catch can
* SRR coolant reservoir
* Custom valvecover

Exhaust;

* Comptech header
* Invidia cat-back system
* Invidia Test pipe

Drivetrain;

* ITR tranny w/ LSD
* ITR clutch
* Exedy flywheel
* EK9 driveshafts

Suspension;

* KW Variant 3
* Energy Suspension polyurethane bushings
* Suspension Techniques front swaybar
* Carbing 3 point front upper strutbrace
* SRR anti-roll bar set achter
* SRR rear lower strut brace
* SRR aluminium rear suspension arms
* SRR front camber correction kit (front)
* Ingalls camber correction kit (rear)
* Summit 4 point rear trunk square bar
* Summit B+C pillar strut bar (roof)
* Summit B pillar floor strut bar

Brakes;

* EK4 front and rear brake swap
* EK4 master cilinder
* Brake Lines; Replaced all lines completely with Goodridge stainless steel lines
* Tilton pressure regulator in line to rear brakes.

Wheels - Tires;

* Work Emotion CR 16”
* Toyo Proxes T1-R 195/45-16
* Buddy Club lug nuts

Exterior;
* 99/00 OEM front bumper
* 99/00 OEM rear bumper
* 99/00 OEM taillights
* OEM EK9 headlights
* OEM EK9 rear spoiler
* OEM EK9 front bumperlip
* OEM EK9 rear bumperlip
* OEM EK9 grill
* OEM EK9 rear Honda logo
* CF hood
* De-locked doorhandles

Interior;

* Gutted interior
* Recaro Pole Position
* OEM EK9 Cluster
* OEM EK9 red carpet
* OEM EK9 pedals
* OEM EK9 shiftboot
* OEM EK9 shiftknob
* Autometer air/fuel ratio meter
* Autometer oil pressure meter
* Autometer oil temp. meter
* Buddy Club shortshifter
* Sparco FIA Quick Release System
* Momo Corse steeringwheel

The car will be fully built by HonTEC

http://www.clubcivic.com/board/showthread.php?t=109138
 

lrodjr21

lrodjr21
5+ Year Member
lrodjr21 96 dx h/b



---------Exterior
-mugen front lip
-type r rear lip
-black tints allway around

---------Under the Hood
some nameless headers does the job
more to come
----------Suspension/Brakes/Wheels
tein s.s suspension
rear low tie bar
-----------Interior
type r shift boot
spoon knob
-skunk2 short throw
-----------------more 2 come stay tune
 
Last edited by a moderator:

kaiser

New Member
5+ Year Member
Alright,

This is my civic which i recently done up from standard, still loads to do but here are a few pics:




Mods:

Air Filter,
Koni adjustable suspension kit- lowered 50mm
17" Anterraz (RARE)
Goodyear Tyres
Front Mugen Lip
Rear Mugen Lip
Pioneer (dolphin) stereo
 
Last edited by a moderator:

stince

Banned
My 97 CX..




Mod List:

Engine:
Cast Manifold
T3/T4oE .57 Trim (yes. big, but full spool by 4200)
Custom 2.5" Downpipe
Custom 1.5" Dumptube
Full Megan 2.5" Drift Spec Exhaust (no cat)
Tial 50mm BOV (purple ftw)
Tial Kock Off Wastegate (10lb spring)
AutoMeter Boost/Oil Pressure
Apexi Turbo Timer
Stealthmode Lines
SRE Charge Pipes
Turbo XS intercooler
DSM 450's
y7block
y7 manifold and head
Walhbro 255
DX Tranny
ACT Stage 2 Clutch
ACT StreetLight Flywheel

Wheels/Suspension:
Rota 16" Slipstreems in flat black
Fronts: Proxes 4's 205/40
Rears: Nito Neo Gens 205/50s
Lowered on Skunk2 Sleeves
Aligned with Skunk2 Camber kits all around

Exterior:
3P2 - Scion Black Cherry Pearl
Type R Front LIp
99-00 Front End Conversion
Brozne Headlights
Retro'd Ina set of s2000 HID Setup
CTR style Grill
Ek9 Sidemarkers
Ek9 Tails
Ek9 Wing
Rear Fog

Interior:
EX Cluster
Autometer Gauges
Pioneer Cd Deck
Fidanza Short Shifter
Type R Boot
Type R Knob
Apexi Turbo Timer
 

A-ron

New Member
5+ Year Member
Hey guys im new to this sight, but here is my 00 hatch / integra or watever you want to call it.:cool:
http://a472.ac-images.myspacecdn.com/images01/46/l_23c6e4e571cf14b070a00b8665765297.jpg

My car and by bro's 2 cars.

List of mods:
Carbon fiber integra type-r front end conversion
carbon fiber side skirts, rear bumper and cf spoon style wing.
jackson racing supercharged d16
megan racing header, magnaflow catalytic conv. catback exhaust w/ megan racing muffler
dropzone coilovers and struts
gold 16" rota gt3's
2 12" polk audio subs
and probably lots of other crap I forgot.
 
Last edited by a moderator:

SIR_PETE

New Member
5+ Year Member
hers my lil baby she's a jdm speck 98 ek4 SIR(facelift modle)




spec list.

STYLING
red badges
jdm tints
carbon spoon spoiler
type r front and back lips
sir midboot spoiler
type r grill
fully colourcoded

CHASSIS
JDM sir alloys
GAB strutbrace
D2 coilovers still to be put on

TUNING

5Zigen 4-2-1 Manifold
5Zigen Pro Racer A-Spec Cat Back
De-cat
spoon Engine damper
random jap induction kit
Apexi/NGK plug leads
Apexi/NGK Iridium Plugs

INTERIOR
mugan pedals

ICE
pioneer p80bt headunit
1000w legasy amp
12 inch pioneer sub
pioneer 6X9's
jvc door components!!


dyno'd to 164.7bhp and 120ft lb torque
 
Last edited by a moderator:

240wootie

New Member
5+ Year Member
here's my '96 hatch.


Mods:
JDM ZC swap.
MSD ignition system
Accel plug wires
190lph fuel pump
iridium plugs
custom exhaust (no cat)
Enkei 17" wheels
Toyo Proxes 4 tires
short shifter
sony Xplod head unit
Xplod 6x9's
Pioneer 6's
Rockford 10" sub
a few crappy gauges someone else put in..

*soon*
t25 turbo set up
450cc injectors
hondata EMS
new 2.5" exhaust
original green paint
 



Top