Reference: D16y7 head info.

vandynamics

New Member
Registered VIP
5+ Year Member
10+ Year Member
well i had this y7 head laying under a pile of junk in my garage so i decided to go at it with a mic. i was going to send this to eric, (fsu) but for some reason or another, i lost tottal communication and he fell of of the face of the earth

here we go:

heres the head. off of a d16y7 1997 model hatchback:






heres my mockup "Snap-On" workbench:


stock camgear. i count 38 teeth:


misc: dissassembly:






ok here i measured the intake and exhaust lobes. this picture is simply to illustrate what i was doing, and doesnt represent that actual measurement (to be precise, it took both hands):


Exhaust = 1.466" Intake = 1.389"

combustion chamber:


diameter (w/ possible carbon build) = 2.929"

heres a good picture that shows the cc cutout around the outer edge for valve clearence. much easier to see in real life:




intake:


X axis = 1.589" Y axis = 1.574"

(one dirty ass)exhaust:


X axis = 1.543" Y axis = 1.138"

enjoy,
-cory
 

Matt.

Banned
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
pretty good man, any plans for the head? or just throwing it away? You could always build it.
 


john92civlx

budget builder :)
5+ Year Member
il buy it from u if u build it up some lol
 


vandynamics

New Member
Registered VIP
5+ Year Member
10+ Year Member
ive been spending all my time on b series heads.

no time for sohc.
 

Steven.

Formally Green 91
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
nice way to bring back a older post
 


Top