rpm wont go above 2000 rpm

Mjhay177

New Member
Good day guys can i know if someone here experienced having stock at 2k rpm at all gears , can i ask what seems to be the problem of my car i drove an civic 1997 sedan ph16a sohc vtec engine manual trans
Appreciate it guys it will be a big help .
 

Attachments

nd4sped

Moderator
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
20+ Year Member
That appears to be a D16Y8 engine but I do not see the VTEC solenoid. At any rate, do you have any CEL illuminated? Would start with that.
 


nd4sped

Moderator
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
20+ Year Member
It has vtec solenoid sir
Im not saying it does, just dont see it clearly in the photo. However are there any CEL's illuminated?
 


nd4sped

Moderator
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
20+ Year Member
wdym by cel illuminated sir
CHECK ENGINE LIGHT = CEL

The plug you removed is the VTEC pressure switch connector. You will want to put that back in place. VTEC switch will not affect idle. Idle is affected by either a faulty Idle Air Control Valve (IACV) which is bolted tot he backside of the intake manifold. Or there is a vacuum leak in the system somewhere allowing unmetered air into the combustion chamber.
 


Top