Swap d15b7 to d16y8 problems

[drix]

Hello everyone ! Im Darek. I have Civic EJ2 LSi about 5 years. Now I swaped engine from D15B7 to D16Y8 and I have problem with start the engine...
What I did:

• ECU P06 modiffication: added VTEC and chip with injection map from D16Y8
• engine harness OBD1 from D15B7 with added wire to VTEC control (pin A4 in ECU)
• Inhaust and Exhaust manifold from D16Z6
• distributor TD41U (OBD1, D15B7)
• spark plug cables D16Y8
• engine block and head D16Y8

I read that engine D16Y8 can work properly via OBD1... but i cant start engine.

What I checked:

• engine timing gear is set properly
• fuel on the spark plug - is
• spark on the spark plug - is . I checked it on all the spark plug cables
• ECU in service mode doesnt report errors

I have no idea what is wrong.
I will be grateful if someone tell me what I should check.
Greetings !

 

[Mr.Baker]

When you put the key in and try to start it, what exactly does it do, or not do?

 

[drix]

Could you see my video from google drive??
photos.app.goo.gl/LZUqmfgbCguHbnLY9

 

[drix]

Any idea?

 

[Jailbird]

I'm not sure but is that the right distributor?

 

[Jailbird]

You won't get service codes without a running engine...