Urgent! P20 tran. D16z6 block. Correct right? Clutch help!!!

Discussion in 'Engine Tech / Drivetrain' started by Dnguyen92, Oct 24, 2011.

Welcome to ClubCivic a Honda Civic Forum

Club Civic is an online Honda Civic forum and community for all Honda Civic enthusiasts. Whether you own a Honda Civic Si, Ex, Type R, Dx, Lx, Cx, Dx, Vx, or even a hybrid you will find valuable information and honda civic car parts on this site. Take a look around to view Honda Civic discussion; including a photo gallery, maintenance information, tech tips, as well as ways to get better performance from your Honda Civic. Visit the Members Ride's to view and rate other member’s Honda Civics. Click here to start viewing the Honda Civic Forums. Before you start posting on this site you will need to register. If you are already registered and not logged in, please login here.

Browse the forums by generation by clicking below or browse all honda civic forums.

  1. Dnguyen92

    Dnguyen92 New Member

    Aug 6, 2011
    So Yesterday my friend and I have spent yesterday and today trying to put in a new clutch. I had to go to work so he's working on it right now and he said the spline from the tranny isn't going into the clutch. I do have the right transmission for the right block don't i? And I'm positive I bought the correct clutch because I payed for one that is for d15 and d16 series. Please urgent help. I need to get to school and work this week ):
  2. jlicrx

    jlicrx New Member Registered VIP 5+ Year Member

    Nov 2, 2006
    Colorado Springs
    yes - all 90 and up D-series use the same flywheel and clutch, and all 89 and up D-series transmissions have the same input shaft diameter with 20 splines - if you bought 90 and up clutch, it will work with any 89 and up transmission


Share This Page