Whats your plan to do/get for your EK coming up 2009 ***

jdmek9imagex

New Member
5+ Year Member
I plan on getting the following for 09 for my 99 sedan:

Skunk2 rear lower control arms
Si amber bulbs for climate control
NRG slim wheel hub
NRG slim quick release hub
NRG hub lock
NRG motor damper
Tein hood damper
Skunk2 high flow race cat
Skunk2 extended wheel studs
Stock Si amber radio
Gsr sedan leather seats
Rear disc conversion
F/R stainless steel brake lines
Skunk2 oil pan/trans drain bolt
Skunk2 cam seal
Yamika bike rack
PasswordJDM CF cooling plate.
Get my oil pan leak fix
relocate aftermarket radio deck to cup holder area
auto meter volt meter gauge
change climate control to si amber
re-polish the Si wheels.
OEM cap and rotor
MSD 10mm spark plug wires
clean interior carpet

after that all done with. Hopefully i can fine an 06 R6 50th anniversary edition or a 07 cbr600rr pearl white
 

pmac193

Thundermuff
Registered VIP
5+ Year Member
10+ Year Member
I hope to sell mine :lol:
If I don't then:
steel wheels w/ snow tires
repaint the valve cover
stock exhaust
 


wannabe

law abiding smog tech
Registered VIP
5+ Year Member
10+ Year Member
15+ Year Member
i just ordered these but they probably wont get here til 2k9:

CDM airbag tray
JDM flip-out cup holder
honda primo windshield banner
herra JDM honda access trash box
JDM parking pole
 

DarkCreep

D16Y8+T
Registered VIP
Registered OG
5+ Year Member
EDM rear fog light.
Finish building my turbo-D
Go lower
New mounts
Rear disk brakes.
 


rey_boricua

2000 EM1 B16A2T
Registered VIP
5+ Year Member
10+ Year Member
15+ Year Member
boost my EM1probably sell my hatch. need a grown up car thinking TL, G35x or IS350
 

Esotericimage

Taking an H-T break
Registered VIP
5+ Year Member
As for mine:
Turbo with all the trimmings (not even goign to point out the Irony here)
Nitrous kit
New wheels and tires
New Paint
New window rubbers for the rear windows
New painted VC from CivicEx13
and as many hookers i can fit in the car...


OK, those are projections for the up coming year and Not necessarily in that order !
 

wannabe

law abiding smog tech
Registered VIP
5+ Year Member
10+ Year Member
15+ Year Member
As for mine:
Turbo with all the trimmings (not even goign to point out the Irony here)
Nitrous kit
New wheels and tires
New Paint
New window rubbers for the rear windows
New painted VC from CivicEx13
and as many hookers i can fit in the car...


OK, those are projections for the up coming year and Not necessarily in that order !
i can fit three in the trunk
 

B-Johnson

New Member
5+ Year Member
Fogs
probably new front bumper (mines cracked all along the bottom)
F&R lips
DIY black housing headlights
take tint off
paint VC
Header
and hopefully come to a conclusion on a swap=)
 

PhntmSk8r

H23VTEC
Registered VIP
5+ Year Member
Hondata s300
Walboro 255
AEM Fuel rail
Aeromotive FPR
Skunk 2 IM
DSM 440's
LOTS of tuning
Driver front LCA
New Fogs
Shorter front SS braided lines

---- all that done before march, basically finish my h23/vtec setup, and rebuild (stats in my sig, click "rebuild thread") ----

And before fall of 2k9
----
Function & Form Type 2
ITR rear sway
ASR subframe brace
PWJDM Strut Tower combo
Mugen Poly or SI front lip (paint matched)
Paint matched side skirts
new 96-98 rear bumper and paint
CF Deck lid

MAYBE trade shells for a 99-00 Hatch or 92-95 Coupe
 

Evan.

iTrader EVERYthing
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
1) s2000 cluster (in progress)
2) ctr cams
3) hondata s300
4) defi gauges
5) boost
 

-hotdog

New Member
5+ Year Member
Engine/Power Terrain/ect.
Pistons/rods - Eagle
Clutch Kit - Clutch Masters
Flywheel - Not sure yet...
Megasquirters ECU
Drive Axles
Torque Damper - NRG?
Intercooler - Yonaka or?
440cc DSM Injectors
Fuel pump - Walbro 255
Fuel Rail - AEM
Fuel Pressure Regulator - AEM
Throttle body - Skunk 2 (port matched to Intake Mani)
Intake Manifold - Skunk 2 (Port Matched to TB)
Radiator - Mishimoto
Spark plugs - Cool NGK's
New Pulleys - NRG or AEM
Head Studs - ARP
Aftermarket Head Gasket - Still Looking
Cam Gears/Shaft - Still Looking
Titanium Valves/Springs/Retainers
Water pump - OEM
Oil pump - OEM
Turbo Manifold - Josh Has product info. i forget it lol
Turbo - Josh has product info. I forget it lol
BOV - HKS
New Final Drive

Suspension/Wheels/Breaks
Brakes - Slotted/Cross Drilled Rotors, Kevlar Pads, Rear Disc Conversion
Coilovers - Can't Remember Company or Tien
4pt Rear Strut Tower Bar or Roll Cage.
Trunk Re-enforcement
Lower Tie Arms
Sub-Frame Brace

Thats all i can think of off hand.

im going for somewhere of upwards or around 350hp.
Hopefully go to work in the Middle of Jan. to get the cash for this.
 

Szady

D-Series Master
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Get a motor in my sedan, and hope to god it runs. :shock:
 

jdmek9imagex

New Member
5+ Year Member
Engine/Power Terrain/ect.
Pistons/rods - Eagle
Clutch Kit - Clutch Masters
Flywheel - Not sure yet...
Megasquirters ECU
Drive Axles
Torque Damper - NRG?
Intercooler - Yonaka or?
440cc DSM Injectors
Fuel pump - Walbro 255
Fuel Rail - AEM
Fuel Pressure Regulator - AEM
Throttle body - Skunk 2 (port matched to Intake Mani)
Intake Manifold - Skunk 2 (Port Matched to TB)
Radiator - Mishimoto
Spark plugs - Cool NGK's
New Pulleys - NRG or AEM
Head Studs - ARP
Aftermarket Head Gasket - Still Looking
Cam Gears/Shaft - Still Looking
Titanium Valves/Springs/Retainers
Water pump - OEM
Oil pump - OEM
Turbo Manifold - Josh Has product info. i forget it lol
Turbo - Josh has product info. I forget it lol
BOV - HKS
New Final Drive

Suspension/Wheels/Breaks
Brakes - Slotted/Cross Drilled Rotors, Kevlar Pads, Rear Disc Conversion
Coilovers - Can't Remember Company or Tien
4pt Rear Strut Tower Bar or Roll Cage.
Trunk Re-enforcement
Lower Tie Arms
Sub-Frame Brace

Thats all i can think of off hand.

im going for somewhere of upwards or around 350hp.
Hopefully go to work in the Middle of Jan. to get the cash for this.
Nice list
 

deemee

I am the Master...
Registered VIP
5+ Year Member
b18c1
fog lights
NRG quick release
LCA's
headers
ek4 cluster
function form type 2's
ASR subframe brace
exhaust
rear disc conversion
 

cgpEJ6

noob
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Y8 head swap & timing belt (in progress)
get the Domani trunk lid and painted and touch up some other spots
Polished GSR blades (in progress)
CTR lip
OEM fogs
Apexi WS2 exhaust
Suspension
rear discs
 

TN4sty 305

New Member
5+ Year Member
Header (ordered)
Short Ram intake (needs to be installed)
Muffler (ordered)
Megan Racing Resonator (In progress)
Lower My Car (not sure with what)
Front Mugen or Spoon Lip (soon...)
Rear Mugen or Spoon Lip (soon..)
17 or 18" rims w/ low profile tires (soon..)
Custom Japanese License plate (ordered)
Fog lights (soon..)
 


Top