BC Racing A-111-RM RM Series Coilovers - Camber Plates: Front NA | Rear NA; Standard Spring Rates: 6K Front | 5K Rear; Mount Style: RN; for a 2016-2018 Honda Civic FC1/FC2 (Non-SI).
|Sorry there are currently no listings for this product.|
BC Racing A-111-RM Fitment:
|2016 - 2018||Honda||Civic||FC1/FC2 (Non-SI)|
The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.
- Highly Customizable
- Inverted Mono-Tube Strut Design
- Linear Piston And Damping Curve
- Height Adjustment Independent Of Spring Compression
- 30-Clicks Of Simultaneous Compression/Rebound Adjustment
- Front Camber Plates Standard On Applicable Kits
- Rear Camber Plates Available For Applicable Kits
- Custom Spring Rates And Swift Spring Compatible
- Custom Valving Or Valving Paired For Custom Spring Rates
- 1-Year Warranty Against Manufacturers Defect
- Fully Rebuildable
Top Mount Types
RS = Front aluminum with rubber/OEM or rubber rear
RN = Reuse OEM front top mount/OEM or rubber rear
RA = Front camber plates/OEM or rubber rear
RH = Camber or pillowball mounts front and rear
ER = Camber/Pillowball front and rear
Some RM Series & Most ER Series systems use different spring rates than BR Series. Please enquire if necessary.